TLIS2036 — Use chemical repair products

Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.

Generate TLIS2036 free See a real sample

Every new account includes a free credit — no card, no subscription.

What an assessment for TLIS2036 must cover

34 assessable components: 3 elements (13 performance criteria), 12 performance evidence and 9 knowledge evidence requirements. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.

Elements & performance criteria

1 Determine work requirements

1.1Site is inspected thoroughly to establish best means of repair
1.2Work requirements are determined to identify scope of work and resources required
1.3Hazards are identified, risks are assessed and control measures are implemented
1.4Personal protective equipment is identified, selected and used as required

2 Apply repair method

2.1Components and surfaces are cleaned and prepared in accordance with manufacturer instructions and workplace procedures to ensure maximum bond strength
2.2Chemical repair product is mixed and prepared in accordance with manufacturer instructions and workplace procedures to ensure maximum bond strength
2.3Chemical repair product is applied in accordance with manufacturer instructions and workplace procedures to minimise waste and maximise effectiveness
2.4Repair site is cleaned of excess repair product to ensure clean finish
2.5Repair is stabilised and supported using appropriate method until product is sufficiently cured to enable maximum bond strength
2.6Chemical repair product is used in a safe and environmentally sound manner to minimise health and safety risks to personnel

3 Complete documentation

3.1Required documentation procedures and processes are confirmed
3.2Documentation is filled in legibly and proofread
3.3Documentation is processed in accordance with workplace procedures

Performance evidence

applying relevant legislation and workplace procedures
checking compliance with work and job specifications
identifying job hazards and taking required action to minimise, control or eliminate identified hazards
inspecting repair site and determining scope of work
interpreting and following operational instructions and prioritising work when using chemical repair products
modifying activities depending on operational contingencies, risk situations and environments
monitoring work activities in terms of planned schedule
reading and interpreting relevant instructions, procedures, information and labels
reporting and/or rectifying identified problems, faults or malfunctions promptly, in accordance with workplace procedures
selecting and using relevant equipment and tools
selecting and using the correct repair method in accordance with safety data sheets (SDSs)/material safety data sheets (MSDSs) and manufacturer instructions
working systematically with required attention to detail without injury to self or others, or damage to equipment

Knowledge evidence

characteristics of relevant plant and equipment, structures and chemical products used in work activities
hazards that may exist when using chemical repair products and ways of controlling the risks involved
information in relevant workplace technical manuals and instructions
problems that may occur when using chemical repair products and action that can be taken to report or resolve these problems
relevant recording and documentation procedures
relevant rail danger zones
relevant safety, work health and safety (WHS)/occupational health and safety (OHS) and environmental procedures and regulations
safety data sheets (SDSs)/material safety data sheets (MSDSs) and manufacturer instructions
workplace procedures for using chemical repair products

Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.

See what you get before you start

Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:

Questions about assessing TLIS2036

What does an assessment tool for TLIS2036 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for TLIS2036 needs to address all 34 unit components: 3 elements with 13 performance criteria, 12 performance evidence requirements, 9 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for TLIS2036?

Auditori pulls the current release of TLIS2036 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for TLIS2036 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing TLIS2036 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of TLIS2036, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.

Related units

Your TLIS2036 assessment tool, in minutes.

First unit free. No card, no RTO registration, no subscription.

Generate TLIS2036 free