TLIS0001 — Construct and assemble points and crossings

Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.

Generate TLIS0001 free See a real sample

Every new account includes a free credit — no card, no subscription.

What an assessment for TLIS0001 must cover

39 assessable components: 4 elements (15 performance criteria), 10 performance evidence and 14 knowledge evidence requirements. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.

Elements & performance criteria

1 Prepare points and crossings

1.1Work requirements are determined to identify scope of work and resources required
1.2Construction design or plan is obtained and interpreted
1.3Hazards are identified, risks are assessed and control measures are implemented
1.4Required resources are acquired
1.5Assembly area is prepared or identified in accordance with workplace procedures
1.6Delivered materials are checked for compliance with design

2 Assemble points and crossings

2.1Construction design or plan is implemented in accordance with manufacturer instructions and workplace procedures
2.2Unsuitable points and crossings equipment replacements are sourced, as required, in accordance with workplace procedures

3 Fabricate points and crossings

3.1Structure is fabricated according to design specification
3.2Bearers are selected for correct length, placed on assembly area and marked up in accordance with specified design and workplace procedures
3.3Reference rail is selected, marked up and fixed to bearers in accordance with specified design and workplace procedures
3.4Remaining steelwork is adjusted for correct geometry and is attached to bearers in accordance with specified design and workplace procedure

4 Check for compliance

4.1Dimensions, geometry and condition of points and crossings are checked for compliance with design
4.2Non compliances are repaired or replaced, as required, in accordance with workplace procedures
4.3Documentation is completed and processed in accordance with workplace procedures

Performance evidence

applying relevant safeworking system and workplace procedures
assembling track layouts to plans, manufacturer instructions and specifications
completing documentation in accordance with workplace procedures
identifying job hazards and taking required action to minimise, control or eliminate identified hazards
interpreting and following operational instructions and prioritising work
modifying activities depending on operational contingencies, risk situations and environments
reading and interpreting relevant technical data, standards and drawings
using appropriate equipment to make accurate measurements of points and crossings
using geometric and dimension principles to ensure compliance with design
working systematically with required attention to detail without injury to self or others, or damage to equipment

Knowledge evidence

appropriate hand tools, power tools and equipment required to complete activities
clearances and tolerances
different types of concrete, steel, timber and composite sleepers and bearers including: individual characteristics, technical and rail network specifications
documentation and record keeping workplace requirements
features and principles of operation of points and crossings
hazards that may exist when constructing points and crossings, and ways of controlling the risks involved
measurement techniques
point and crossing manufacturer instructions, rail industry standards and workplace procedures
problems that may occur when constructing points and crossings, and action that can be taken to report or resolve these problems
rail bending techniques applied to point and crossing components
safety data sheets (SDS)/material safety data sheets (MSDS) and/or manufacturer instructions and workplace procedures
techniques for constructing points and crossings
work health and safety (WHS)/occupational health and safety (OHS) and environmental procedures and regulations
workplace procedures for constructing points and crossings

Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.

See what you get before you start

Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:

Questions about assessing TLIS0001

What does an assessment tool for TLIS0001 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for TLIS0001 needs to address all 39 unit components: 4 elements with 15 performance criteria, 10 performance evidence requirements, 14 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for TLIS0001?

Auditori pulls the current release of TLIS0001 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for TLIS0001 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing TLIS0001 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of TLIS0001, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.

Related units

Your TLIS0001 assessment tool, in minutes.

First unit free. No card, no RTO registration, no subscription.

Generate TLIS0001 free