TLIS0004 — Measure and mark track for resurfacing

Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.

Generate TLIS0004 free See a real sample

Every new account includes a free credit — no card, no subscription.

What an assessment for TLIS0004 must cover

41 assessable components: 5 elements (14 performance criteria), 16 performance evidence and 11 knowledge evidence requirements. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.

Elements & performance criteria

1 Plan for resurfacing

1.1Scope of resurfacing work, including ramp-in and ramp-out points, mode of machine application and requirements for measurements are determined
1.2Appropriate survey or relevant documentation is selected in accordance with workplace procedures
1.3Survey plaques and monuments are located and accurately interpreted as required
1.4Hazards are identified, risks are assessed and control measures are implemented

2 Mark or protect obstructions

2.1Track obstructions are identified
2.2Track obstructions are marked or protected, as required, in accordance with workplace procedures

3 Measure geometry and record results

3.1Equipment appropriate to task is selected and checked in accordance with manufacturer instructions and workplace procedures
3.2Equipment is operated in accordance with manufacturer or work instructions to provide appropriate data for analysis
3.3Track geometry is measured in accordance with workplace procedures
3.4Measurements are recorded in accordance with workplace procedures

4 Mark track

4.1Offsets and machine adjustment values are calculated as required and recorded in accordance with workplace procedures
4.2Track data is marked on track as required in accordance with workplace procedures

5 Use/report data

5.1Data is compared to track maintenance/construction tolerances in accordance with workplace procedures
5.2Results are reported in accordance with workplace procedures

Performance evidence

adapting to differences in equipment in accordance with workplace procedures
applying relevant safeworking system and workplace procedures
calculating, recording and marking data for resurfacing operations from information sources such as survey sheets, survey marks and curve compensation charts
completing relevant documentation
identifying and marking track obstructions
identifying job hazards and taking required actions to minimise, control or eliminate identified hazards
identifying, selecting and using tools and equipment
interpreting and following operational instructions
modifying activities depending on operational contingencies, risk situations and environments
monitoring work activities in terms of planned schedule
reading and interpreting relevant instructions, procedures, information, plans, drawings and specifications
reading track geometry data
recording and reporting results in accordance with workplace procedures
reporting and/or rectifying identified problems, in accordance with workplace procedures
using appropriate measurement tools to measure the range of geometry elements
working systematically with required attention to detail without injury to self or others, or damage to goods or equipment

Knowledge evidence

hazards that may exist when measuring and marking track for resurfacing, and ways of controlling the risks involved
methods of marking and protecting obstructions
obstructions to resurfacing operations, including operation of tampers, ballast regulators and stabilisers
problems that may occur when measuring and marking track for resurfacing operations, and actions that can be taken to report or resolve these problems
relevant rail danger zones
relevant records procedures
relevant rail safety, work health and safety (WHS)/occupational health and safety (OHS) and environmental procedures and regulations
safeworking system procedures
track data requirements for resurfacing
track geometry parameters associated with maintenance and/or construction such as alignment, top, line, twist, superelevation
workplace procedures for recording and analysing track parameters

Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.

See what you get before you start

Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:

Questions about assessing TLIS0004

What does an assessment tool for TLIS0004 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for TLIS0004 needs to address all 41 unit components: 5 elements with 14 performance criteria, 16 performance evidence requirements, 11 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for TLIS0004?

Auditori pulls the current release of TLIS0004 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for TLIS0004 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing TLIS0004 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of TLIS0004, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.

Related units

Your TLIS0004 assessment tool, in minutes.

First unit free. No card, no RTO registration, no subscription.

Generate TLIS0004 free