TLIS2004 — Install and maintain rail bonding systems

Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.

Generate TLIS2004 free See a real sample

Every new account includes a free credit — no card, no subscription.

What an assessment for TLIS2004 must cover

49 assessable components: 4 elements (20 performance criteria), 15 performance evidence and 14 knowledge evidence requirements. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.

Elements & performance criteria

1 Plan the installation and maintenance of the relevant bonding systems

1.1Work order, including drawings, plans and material lists, is received/accessed, analysed and confirmed as required by site inspection
1.2Work is assessed and prioritised in accordance with works scheduled
1.3Site relevant electrical permits are accessed and/or obtained as required
1.4Hazards are identified, risks are assessed and control measures are implemented
1.5Resources, including personnel, plant, equipment and tools are identified and scheduled
1.6Liaison and communication issues with other personnel, authorities, clients and landowners are resolved

2 Prepare the worksite

2.1Personnel participating in the task, including plant operators and contractors, are fully briefed
2.2Site preparation is completed in accordance with works order
2.3Specialist testing and earth equipment is inspected as required and replaced if defective
2.4Road signs, barriers and warning devices are positioned as required
2.5Safeworking practices are observed on or about the running track/line

3 Install and maintain bonding system cables

3.1Systems and circuits are isolated as required, proved safe to work on in accordance with work plan and electrical permits are issued/accepted/relinquished as required
3.2Cable and surrounds, including rail and other surfaces, are prepared to appropriate specifications
3.3Bonds are attached in accordance with specifications
3.4Joint and termination procedures are carried out in accordance with authorised work procedures
3.5Continuity testing procedures are carried out as required
3.6System is commissioned following visual inspection and the completion of other testing

4 Conduct post-operational activities

4.1Worksite is rehabilitated in accordance with workplace procedures
4.2Work is completed in accordance with work plan
4.3Notifications, records and documentation for updating system data are completed

Performance evidence

applying relevant safeworking and workplace procedures
communicating effectively with others
completing relevant documentation
guiding operators of plant and equipment and using appropriate signals when installing and maintaining cables
identifying job hazards and taking required action to minimise, control or eliminate identified hazards
implementing contingency plans
interpreting and following operational instructions and prioritising work
modifying activities depending on operational contingencies, risk situations and environments
monitoring work activities in terms of planned schedule
organising activities in accordance with workplace procedures and work plan
reading and interpreting relevant technical data, drawings, work plans, instructions and manuals
reporting and/or rectifying identified problems, faults or malfunctions, in accordance with workplace procedures
selecting and using relevant equipment and tools
working collaboratively with others
working systematically with required attention to detail without injury to self or others, or damage to goods or equipment

Knowledge evidence

applicable state/territory legislated rail safety requirements, relevant codes of practice and/or guidelines
characteristics, capabilities and uses of various types of cables
circuits for signalling and communications systems awareness as a non-electrical rail safety worker
current capacities, inductance and capacitance, protection systems and devices
electrical hazard awareness including voltage and current transformation, voltage drop, cable and traction systems
joint test and fault identification/location workplace procedures
problems that may occur when installing and maintaining rail bonding systems and action that can be taken to report or resolve these problems
rail industry standards for installing and maintaining rail bonding systems
switching operation, isolation and access permit procedures
testing and commissioning procedures, including testing and earth/rail connecting conductors
traction earthing systems and bonding systems
work health and safety (WHS)/occupational health and safety (OHS) and environmental procedures and regulations
workplace documentation and records systems
workplace procedures for installing and maintaining rail bonding systems for non-electrical rail safety workers

Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.

See what you get before you start

Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:

Questions about assessing TLIS2004

What does an assessment tool for TLIS2004 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for TLIS2004 needs to address all 49 unit components: 4 elements with 20 performance criteria, 15 performance evidence requirements, 14 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for TLIS2004?

Auditori pulls the current release of TLIS2004 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for TLIS2004 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing TLIS2004 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of TLIS2004, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.

Related units

Your TLIS2004 assessment tool, in minutes.

First unit free. No card, no RTO registration, no subscription.

Generate TLIS2004 free