Auditori
Get started

TLIS0003 — Install turnouts

Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.

Generate TLIS0003 freeSee a real sample

Every new account includes a free credit — no card, no subscription.

What an assessment for TLIS0003 must cover

34 assessable components: 4 elements (14 performance criteria), 9 performance evidence and 11 knowledge evidence requirements. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.

Elements & performance criteria

1 Prepare to install turnouts

  • 1.1Work requirements are established to identify scope of work and resources required
  • 1.2Construction design or plan is obtained and interpreted
  • 1.3Required resources are acquired in accordance with workplace procedures
  • 1.4Hazards are identified, risks are assessed and control measures are implemented
  • 1.5Existing track work is removed from worksite
  • 1.6Track bed is prepared for installation of points and crossings in accordance with workplace procedures

2 Prepare points and crossings for transport

  • 2.1Transport requirements are confirmed
  • 2.2Transport requirements are followed in accordance with manufacturer instructions and workplace procedures
  • 2.3Documentation is completed and processed in accordance with workplace procedures

3 Install turnouts

  • 3.1New points and crossings are installed in accordance with specified design, manufacturer instructions and workplace procedures
  • 3.2Dimensions, geometry, condition and operation are checked for compliance with rail industry standards in accordance with design, manufacturer instructions and workplace procedures
  • 3.3Non-compliances are repaired or replaced, as required in accordance with workplace procedures

4 Complete installation process

  • 4.1Documentation is completed in accordance with organisational procedures
  • 4.2Appropriate personnel are informed that the installation has been completed, in accordance with organisational procedures

Performance evidence

  • applying relevant safeworking system and workplace procedures
  • communicating effectively with others
  • identifying job hazards and taking required action to minimise, control or eliminate identified hazards
  • installing points and crossings to plans and specifications
  • interpreting and following operational instructions and prioritising work
  • modifying activities depending on operational contingencies, risk situations and environments
  • reading and interpreting relevant technical data, standards and drawings
  • using appropriate equipment to make accurate measurements of points and crossings
  • working systematically with required attention to detail without injury to self or others, or damage to equipment

Knowledge evidence

  • clearances and tolerances
  • documentation and record keeping requirements
  • features and principles of operation of points and crossings
  • hazards that may exist when installing points and crossings, and ways of controlling the risks involved
  • measurement techniques
  • point and crossing rail industry standards, manufacturer instructions and workplace procedures
  • problems that may occur when installing points and crossings, and action that can be taken to report or resolve these problems
  • relevant communications systems and procedures
  • relevant rail safety, work health and safety (WHS)/occupational health and safety (OHS) and environmental procedures and regulations
  • techniques for installing points and crossings
  • workplace procedures for installing points and crossings

Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.

See what you get before you start

Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:

Questions about assessing TLIS0003

What does an assessment tool for TLIS0003 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for TLIS0003 needs to address all 34 unit components: 4 elements with 14 performance criteria, 9 performance evidence requirements, 11 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for TLIS0003?

Auditori pulls the current release of TLIS0003 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for TLIS0003 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing TLIS0003 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of TLIS0003, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.

Related units

Your TLIS0003 assessment tool, in minutes.

First unit free. No card, no RTO registration, no subscription.

Generate TLIS0003 free