UETDRIS010 — Install and maintain low voltage overhead services

1 Prepare to install and maintain LV overhead services

• 1.1Legislation, regulations, standards, codes of practice and organisational workplace requirements for the work to be performed are referred to and confirmed
• 1.2Work plan is obtained and confirmed in accordance with workplace requirements
• 1.3Materials required for work are determined and obtained in accordance with work plan and workplace requirements
• 1.4Plant, tools, equipment and personal protective equipment (PPE) required for work are determined, obtained and confirmed in working order
• 1.5Hazards are identified, risks assessed and control measures identified and applied
• 1.6Pre-climbing assessment is conducted in accordance with workplace requirements
• 1.7Work is prioritised and sequenced for completion in accordance with workplace requirements
• 1.8Worksite is prepared in accordance with work plan workplace requirements
• 1.9Traffic management plan is confirmed as being in place in accordance with workplace requirements
• 1.10Safety observer role and responsibilities are discussed and confirmed in accordance with workplace requirements
• 1.11Communication method between the workers and safety observer is determined and confirmed in accordance with workplace requirements
• 1.12Safe approach distances for the work to be performed are determined and confirmed in accordance with workplace requirements

2 Carry out installation and maintenance of LV overhead services

• 2.1Legislation, regulations, standards, codes of practice and organisational workplace requirements for the work to be performed are applied and monitored
• 2.2Lifting, climbing, working at heights and the use of plant, tools, equipment and PPE are used in accordance with workplace requirements
• 2.3Hazard control measures are monitored in accordance with workplace requirements
• 2.4Safety observer is positioned to observe the work in accordance with workplace requirements
• 2.5Communication methods between workers and safety observer are used in accordance with workplace requirements
• 2.6Safe approach distances are maintained when the work is being performed
• 2.7Specialised energised LV equipment to work on energised LV overhead services is used in accordance with workplace requirements
• 2.8LV overhead service and hardware are installed in accordance with the work plan and workplace requirements
• 2.9LV overhead service and hardware are maintained in accordance with the work plan and workplace requirements
• 2.10LV overhead service is tested and commissioned in accordance with the work plan and workplace requirements
• 2.11Incidents or unplanned events are responded to in accordance with workplace requirements
• 2.12Quality checks of work are undertaken in accordance with work plan, network standards and workplace requirements

3 Complete work and documentation

• 3.1Completed work is checked for compliance against the work plan, network standards in accordance with workplace requirements
• 3.2Incidents or unplanned events are reported in accordance with workplace requirements
• 3.3Worksite is rehabilitated, cleaned up and made safe in accordance with workplace requirements
• 3.4Plant, tools and equipment are cleaned, checked and returned to storage in accordance with workplace requirements
• 3.5Surplus materials are returned to storage or disposed of in accordance with workplace requirements
• 3.6Work records, reports and documentation are completed in accordance with network standards and workplace requirements

What does an assessment tool for UETDRIS010 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for UETDRIS010 needs to address all 124 unit components: 3 elements with 30 performance criteria, 43 performance evidence requirements, 51 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for UETDRIS010?

Auditori pulls the current release of UETDRIS010 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for UETDRIS010 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing UETDRIS010 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of UETDRIS010, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.