Auditori
Get started

UEERS0036 — Repair rail signalling power and control cables

Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.

Generate UEERS0036 freeSee a real sample

Every new account includes a free credit — no card, no subscription.

What an assessment for UEERS0036 must cover

53 assessable components: 3 elements (21 performance criteria), 11 performance evidence and 21 knowledge evidence requirements. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.

Elements & performance criteria

1 Prepare to repair rail signalling cables

  • 1.1Work health and safety (WHS)/occupational health and safety (OHS) requirements and workplace procedures for work area are identified, obtained and applied
  • 1.2Hazards are identified, risks assessed, and control measures and workplace procedures implemented
  • 1.3Safety hazards that have not previously been identified are noted on the job safety assessments and existing risk control measures implemented
  • 1.4Access times and safe work methods are confirmed to comply with customer requirements and relevant rail safety legislation
  • 1.5Appropriate person/s is consulted to ensure work is coordinated effectively with others on the worksite
  • 1.6Extent and nature of the fault or damage to the rail signalling cable is confirmed with appropriate person/s in accordance with workplace procedures
  • 1.7Cable joining kit is obtained in accordance with workplace procedures and components checked with manufacturer specifications
  • 1.8Cable diagrams necessary to effect repairs are obtained, read and interpreted
  • 1.9Tools and cable testing devices for cable repair are obtained in accordance with workplace procedures and checked for correct operation and safety

2 Repair damaged rail signalling cables

  • 2.1Work area is made safe, damaged rail signalling cable is isolated for repair and WHS/OHS risk control measures and workplace procedures for carrying out the repair/s are followed
  • 2.2On-track safe working requirements are identified and applied in accordance with workplace procedures and safety management system
  • 2.3Corresponding ends of broken cable core are identified by core marking and confirmed by continuity test in accordance with workplace procedures
  • 2.4Cable joining kit is used to repair damaged cable following manufacturer specifications and workplace procedures
  • 2.5Repair to damaged cable is tested for cable core continuity insulation between cable cores and cores to earth in accordance with workplace procedures
  • 2.6Cause of failed cable test is located and rectified in accordance with workplace procedures
  • 2.7Existing work methods for dealing with unplanned situations are dealt with safely in a manner that minimises risk to personnel and equipment and with the approval of an authorised person/s
  • 2.8Cable repair is completed without waste of materials or damage to apparatus, the surrounding environment or services using sustainable energy practices

3 Complete rail signalling cable repairs

  • 3.1WHS/OHS work completion risk control measures and workplace procedures are followed
  • 3.2Work area is cleaned and made safe in accordance with workplace procedures
  • 3.3On-track safe working requirements are removed in accordance with workplace procedures and safety management system
  • 3.4Cable repair work, test results and relevant reports are documented and appropriate person/s notified in accordance with workplace procedures

Performance evidence

  • applying relevant work health and safety (WHS)/occupational health and safety (OHS) requirements, including using risk control measures
  • applying sustainable energy principles and practices
  • prepare to repair rail signalling cables
  • interpreting cable diagrams
  • using testing devices and tools correctly and safely
  • identifying corresponding ends of broken cable cores accurately
  • locating and rectifying causes of failed cable test
  • selecting approved cable joining kit, cable repair tools and testing devices
  • repairing damaged rail signalling cables effectively and in accordance with workplace procedures
  • completing relevant technical reports, records and documentation
  • dealing with unplanned events in a manner that minimises risk to personnel and equipment

Knowledge evidence

  • conductor continuity and core insulation and earth testing procedures and acceptable results, including:
  • testing to confirm de-energised cores
  • continuity of repaired cores, earth resistance of repaired cores and insulation between repaired cores
  • acceptable cable test results standards
  • recording of test results
  • methods of joining broken cable core conductors and reinstating insulation, including:
  • using hand tools to remove insulation and apply crimp lugs
  • selecting inline joiner lugs
  • selecting appropriate jointing materials and kits
  • special termination tools and their use, including:
  • insulation removal tools
  • inline crimping tools
  • conducting tool tests
  • checking calibration date
  • recording tests
  • types of cable used for rail signalling including signalling power and multi-core control cables
  • types of cable joining kits used to repair damaged signal cables
  • workplace procedures for identifying corresponding ends of broken cable cores, including cable isolation methods and testing de-energised cable cores
  • relevant manufacturer specifications and manuals
  • relevant WHS/OHS requirements, job safety assessments and risk mitigation processes
  • relevant workplace documentation, policies and procedures

Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.

See what you get before you start

Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:

Questions about assessing UEERS0036

What does an assessment tool for UEERS0036 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for UEERS0036 needs to address all 53 unit components: 3 elements with 21 performance criteria, 11 performance evidence requirements, 21 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for UEERS0036?

Auditori pulls the current release of UEERS0036 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for UEERS0036 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing UEERS0036 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of UEERS0036, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.

Related units

Your UEERS0036 assessment tool, in minutes.

First unit free. No card, no RTO registration, no subscription.

Generate UEERS0036 free