UEERS0022 — Find and repair rail signalling system faults

1 Prepare to find and repair rail signalling system fault/s

• 1.1Work health and safety (WHS)/occupational health and safety (OHS) requirements and workplace procedures for a given work area are identified, obtained and clarified
• 1.2Hazards are identified, WHS/OHS risks assessed, and control measures and workplace procedures are implemented in preparation for work
• 1.3Safety hazards that have not previously been identified are documented on job safety assessments, risks are assessed, and control measures determined and implemented in consultation with appropriate person/s
• 1.4Appropriate person/s is consulted to determine the nature and scope of the fault/s and to coordinate effectively with others affected by the fault/s
• 1.5Likely causes of the fault/s and order of probability are determined from system data and historical trends
• 1.6Impact of the fault on system is ascertained and appropriate person/s notified in accordance with workplace procedures
• 1.7Materials needed to find and repair the fault are obtained in accordance with workplace procedures and checked against job specifications
• 1.8Tools, equipment and testing devices needed to find and repair the fault/s are obtained in accordance with workplace procedures and checked for correct operation and safety
• 1.9Authorisation to take temporarily out of service or disable systems is obtained in accordance with workplace procedures
• 1.10Circuits/equipment are inspected and checked as being isolated, where necessary, in strict accordance with operational procedures and WHS/OHS requirements

2 Find and repair rail signalling system faults

• 2.1WHS/OHS risk control measures and workplace procedures for carrying out work are followed
• 2.2On-track safe working requirements are identified and applied in accordance with workplace procedures and safety management system
• 2.3Signalling system performance parameters/standards are applied to appropriate fault-finding techniques
• 2.4Inspection and tests are conducted to determine the type and location of fault/s
• 2.5Wiring system is visually inspected for physical damage or installation defects, as required
• 2.6Methods for dealing with unplanned situations are selected on the basis of safety, operational requirements and specified work outcomes
• 2.7Ongoing inspections and checks of the signalling system are undertaken to confirm the continued rectification of the fault
• 2.8Fault/s are located and identified efficiently, without waste of materials or damage to apparatus, the surrounding environment or services using sustainable energy practices
• 2.9Signalling system faults are rectified in accordance with workplace procedures

3 Complete repair/s to rail signalling system

• 3.1WHS/OHS risk control measures and workplace procedures for carrying out work are followed
• 3.2Unresolved faults are reported to appropriate person/s for further action in accordance with workplace procedures
• 3.3Inspection and test results, actions taken or recommended are documented and appropriate person/s notified in accordance with workplace procedures
• 3.4On-track safe working requirements are removed in accordance with workplace procedures and safety management system
• 3.5Component fault/s, test result/s, authorisation/s and permit/s documentation are completed to provide an accurate database and facilitate follow-up action and relevant reports

What does an assessment tool for UEERS0022 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for UEERS0022 needs to address all 36 unit components: 3 elements with 24 performance criteria, 5 performance evidence requirements, 7 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for UEERS0022?

Auditori pulls the current release of UEERS0022 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for UEERS0022 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing UEERS0022 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of UEERS0022, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.