Auditori
Get started

ICTCBL240 — Place and secure customer cable

Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.

Generate ICTCBL240 freeSee a real sample

Every new account includes a free credit — no card, no subscription.

What an assessment for ICTCBL240 must cover

48 assessable components: 4 elements (18 performance criteria), 7 performance evidence and 16 knowledge evidence requirements, plus 7 foundation skills. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.

Elements & performance criteria

1 Prepare for task and identify cable route

  • 1.1Arrange access to site according to customer instructions, required procedures and site security arrangements
  • 1.2Notify appropriate personnel of identified safety hazards at cabling worksite
  • 1.3Plan cable route, identifying and avoiding other services and remote power feeding services operating at above telecommunications network voltage (TNV) on site in commercial buildings
  • 1.4Select cable route to maintain required clearances and segregations according to cable plan and relevant industry standards
  • 1.5Confirm cable route and requirements with customer
  • 1.6Select tools, equipment and cables for installation of support system from work specifications and schedules

2 Set-up cable dispensers

  • 2.1Determine feeder locations to minimise wastage of cable and efficiency
  • 2.2Set-up feeders in locations that provide ease of access during hauling of cable
  • 2.3Secure feeder locations to minimise safety risks during installation
  • 2.4Label hauling end of cable with unique identifier prior to placement

3 Install cable

  • 3.1Haul and place cable in safe manner within clearances required by industry standards, and manufacturer and work specifications
  • 3.2Place cable in neat, orderly and methodical manner, allowing sufficient excess at cable ends to facilitate termination
  • 3.3Inspect cable to maintain separations according to regulations
  • 3.4Install barriers to achieve separations where sufficient spatial separation cannot be met with other services
  • 3.5Install and trim, securing anchors promptly to restrain cable movement according to manufacturer specifications

4 Complete cable installation

  • 4.1Update records and cable plans promptly and accurately
  • 4.2Store records and plans according to customer and enterprise requirements
  • 4.3Remove installation waste and debris from worksite and dispose of according to environmental requirements to maintain safe worksite conditions

Performance evidence

  • comply with all related work health and safety (WHS) requirements and work practices
  • plan cable placement and discuss the installation requirements with appropriate personnel
  • organise tools, equipment and materials for cable installation according to specifications
  • set up cable dispensers for internal or external premises structures or aerial and underground cabling between premises
  • haul and install cables on support structures and building faces for both internal and external locations, applying relevant regulations and standards
  • install securing products in accordance with manufacturer specifications and industry standards
  • complete records and relevant statutory forms.

Knowledge evidence

  • legislation, regulations, codes, standards, rules and other formal agreements that impact on cable installation, in particular:
  • wiring rules
  • mandatory and voluntary technical standards
  • specific WHS and environmental requirements relating to cable installation and site conditions, including typical safety issues and challenges that occur on cable installation sites
  • construction of cabling in commercial buildings
  • cable and services segregation clearances to ensure cable route complies with legislation and industry codes of practice, manufacturer specifications, and enterprise requirements
  • features and operating requirements of equipment required to place and secure cable
  • information required to operate appropriate equipment according to specifications
  • installation methods and performance requirements
  • manufacturer requirements for safe operation of equipment
  • common methods of hauling cable and typical damage that can occur to cable when it is hauled incorrectly
  • purpose, construction, and characteristics of types of cable used in performance evidence
  • cable screening types
  • recognition of colour codes
  • switching systems, including customer switching services, system distribution frames/test point frames, power failures and line interface requirements
  • basic telephony, including operation.

Foundation skills

  • Reading: Interprets textual information from relevant sources to identify relevant and key information Reads and interprets plans to help to determine cable layout
  • Writing: Uses clear, specific and industry related terminology to complete workplace documentation
  • Oral Communication: Provides information using appropriate language for the environment and purpose Uses listening and questioning techniques to confirm understanding
  • Numeracy: Takes readings and measurements and interprets results
  • Navigate the world of work: Complies with explicit policies, procedures and legislative requirements relevant to own role
  • Interact with others: Identifies and follows accepted communication practices and protocols when liaising with internal and external personnel on technical and operational matters
  • Get the work done: Determines job sequence and works logically and systematically to undertake clearly defined tasks Analyses task requirements to decide on appropriate equipment and practices

Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.

See what you get before you start

Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:

Questions about assessing ICTCBL240

What does an assessment tool for ICTCBL240 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for ICTCBL240 needs to address all 48 unit components: 4 elements with 18 performance criteria, 7 performance evidence requirements, 16 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for ICTCBL240?

Auditori pulls the current release of ICTCBL240 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for ICTCBL240 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing ICTCBL240 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of ICTCBL240, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.

Related units

Your ICTCBL240 assessment tool, in minutes.

First unit free. No card, no RTO registration, no subscription.

Generate ICTCBL240 free