CPCCCM3001 — Operate elevated work platforms up to 11 metres

Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.

Generate CPCCCM3001 free See a real sample

Every new account includes a free credit — no card, no subscription.

What an assessment for CPCCCM3001 must cover

56 assessable components: 6 elements (23 performance criteria), 13 performance evidence and 15 knowledge evidence requirements, plus 5 foundation skills. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.

Elements & performance criteria

1 Plan and prepare.

1.1Job requirements are obtained, confirmed and applied to planning.
1.2Work site is inspected and terrain level checked to determine stabilising and safe working area requirements.
1.3Work site conditions and hazards are assessed and site health and safety requirements confirmed and applied to planning.
1.4Safe work method statement (SWMS) for the type of EWP and job and work site requirements is reviewed with relevant personnel and confirmed.
1.5Plant, tools and equipment, including personal protective equipment (PPE), are selected according to job requirements, checked for serviceability, and faults are rectified or reported before starting work.
1.6Materials appropriate to the work application are identified, obtained, prepared, safely handled and located ready for use.
1.7Verbal and non-verbal communication signals are confirmed with team members, supervisor, and other personnel working on site, as required.
1.8Rescue plan, including use of fall arrest system, is established and practised before using EWP.

2 Conduct routine checks of EWP.

2.1Power source is connected to platform equipment according to manufacturer specifications.
2.2Routine pre-operational equipment checks are carried out according to operator manual or manufacturer specifications, and logbooks for defect checks and EWP maintenance schedules.
2.3Equipment is switched on in line with start-up procedures, and controls are checked for correct operation and ease of movement.
2.4EWP is checked to ensure that emergency safety devices specified in operator manual are present and operating correctly.

3 Locate EWP in place.

3.1Platform is positioned for work application and stabilisers, if fitted, are engaged to set equipment base level into place according to safe operating procedures.
3.2Tools, equipment and materials are placed into bucket or on platform according to job application requirements.

4 Elevate platform to work location.

4.1Fall arrest harness is fitted securely and lanyard is connected to attachment point.
4.2EWP controls are operated according to manufacturer recommendations and platform is elevated to work position.
4.3Power is switched off where specified and locking devices are engaged according to operator manual.
4.4Work is carried out according to job specification, operator manual, and health and safety requirements.

5 Lower platform and shut down.

5.1Controls are operated according to manufacturer recommendations and platform is lowered to down position.
5.2Shut-down procedures are carried out according to operator manual instructions and equipment is switched off.

6 Clean up.

6.1Work area is cleared and materials disposed of, reused or recycled according to legislation, regulations, codes of practice, and job specifications.
6.2EWP, tools and equipment are cleaned, checked, maintained and stored according to manufacturer recommendations and standard work practices.
6.3Work completion procedures are applied and relevant personnel notified that work is finished.

Performance evidence

set up and operate each of the following types of elevated work platforms (EWPs) at two different locations on the site, including moving the plant around the work site safely: self-propelled boom lift (BL); scissor lift (SL).
The following functions and controls must be performed while operating both BL and SL: boom up and down; operate attachments; operate outriggers, where fitted.
The following functions and controls must be performed while operating the BL: slew left and right; telescope in and out.
At least one EWP must be set up and operated on uneven terrain, using outriggers as required.
fit harnesses and attach lanyards as follows: energy or shock absorbers, which must be used with all fall arrest equipment; lanyards, which must be attached to the harness installed so that the maximum distance a person equipped with a harness would free fall before the fall arrest system takes effect is two metres.
establish and apply a rescue plan
apply safe operating procedures, including conducting operational risk assessment and treatments associated with: earth leakage boxes; lighting; power cables, including overhead service trays, cables and conduits; restricted access barriers; surrounding structures; traffic control; trip hazards; work site visitors and the public; working at heights up to 11 metres; working in proximity to others; working with dangerous materials
locate, interpret and apply information relating to job requirements, including: diagrams and sketches; environmental requirements, including: clean-up protection, noise and dust management, vibration management, waste management; quality requirements relevant to EWP work; instructions issued by authorised organisational and external personnel; manufacturer specifications, operator manual, and instructions where specified; signage; industry standards and job specifications; verbal, written and graphical instructions; work schedules, plans and specifications
comply with site safety plan and health and safety legislation, regulations and codes of practice applicable to workplace operations
safely and effectively use tools, plant and equipment relevant to EWP work
ensure safe working load of EWP is not exceeded
communicate with others on the work site using verbal and non-verbal communication and communication technology
work effectively and safely with others on the work site

Knowledge evidence

functions and operational limitations of EWP equipment
types of EWP equipment and health and safety authority certification of competency requirements
controls and techniques for using EWP
health and safety requirements for construction work sites, including: procedures relating to equipment operation, including emergency shutdown and stopping, extinguishing equipment fires, organisational first aid requirements, and evacuation procedures; hazard identification and risk control procedures, including for handling hazardous materials and dangerous goods; selection and use of personal protective equipment (PPE); location and use of firefighting equipment; selection and use of tools and equipment; processes for identifying equipment faults
general construction terminology relevant to operating EWPs
safe operating procedures for operating EWPs, including contents of and terms used in: job safety analyses (JSA); safe work method statements (SWMS); safety data sheets (SDS)
processes for calculating load mass requirements
quality requirements relevant to operating EWPs
regulatory and legislative requirements relevant to operating EWPs
AS 2550 Set: Cranes, hoists and winches - Safe use
relevant Acts, regulations and codes of practice relevant to working safely at heights on construction sites
procedures for working safely at heights
signalling methods and communications relevant to operating EWPs
types, characteristics, use and limitations of plant, tools and equipment relevant to operating EWPs
use and limitations of fall rescue systems

Foundation skills

Numeracy skills: interpret safe working load of EWP from manufacturer specifications; calculate the load to be put on EWP.
Oral communication skills: provide work site personnel with key safety information when elevating and lowering an EWP; use listening and questioning to clarify job and health and safety requirements.
Reading skills: interpret operator manual instructions for using different controls of EWPs and operating on different types of terrain.
Writing skills: legibly complete required documentation, including: equipment inspection and handover documents that form part of work completion procedures; faulty equipment or workplace incident reports.
Planning and organising skills: plan and schedule work in a logical sequence.

Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.

See what you get before you start

Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:

Questions about assessing CPCCCM3001

What does an assessment tool for CPCCCM3001 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for CPCCCM3001 needs to address all 56 unit components: 6 elements with 23 performance criteria, 13 performance evidence requirements, 15 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for CPCCCM3001?

Auditori pulls the current release of CPCCCM3001 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for CPCCCM3001 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing CPCCCM3001 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of CPCCCM3001, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.

Related units

Your CPCCCM3001 assessment tool, in minutes.

First unit free. No card, no RTO registration, no subscription.

Generate CPCCCM3001 free