CPCCBL3003 — Carry out cavity brick construction

1 Prepare for work.

• 1.1Select, fit correctly and use personal protective equipment (PPE) appropriate for job.
• 1.2Read, interpret and apply cavity brick construction requirements from current plans, specifications, standards and codes.
• 1.3Follow requirements in workplace safety and environmental documentation and workplace procedures.
• 1.4Use measurements and apply formulas to calculate material quantities.
• 1.5Determine job priorities and sequence job tasks in consultation with others on site.
• 1.6Identify potential hazards and determine and implement control measures.
• 1.7Select and check condition of plant, equipment and tools and report damage or faults to relevant person.
• 1.8Check materials against the specifications and report non-conformities to relevant person.

2 Set out brickwork.

• 2.1Set out and mark base brickwork.
• 2.2Set out brickwork gauge and bond.
• 2.3Set out load bearing brickwork.
• 2.4Set out door and window positions.

3 Construct base brickwork.

• 3.1Mix mortar to specified consistency.
• 3.2Lay cavity brick base to set out marks.
• 3.3Locate and install damp-proofing, weepholes and ventilation for suspended floor construction.

4 Construct brick walls.

• 4.1Construct brick walls straight, plumb and level.
• 4.2Fix wall ties to specified positions.
• 4.3Locate and build in standard height door jambs and window frames into cavity walls.
• 4.4Install lintels and head flashings to openings.
• 4.5Construct gables and parapets maintaining line, level and plumb.
• 4.6Install roof tie down and lateral support into walls.
• 4.7Cut and lay sill bricks to a line as specified.

5 Rake or rule joints.

• 5.1Rake or rule joints to specified profile and depth.
• 5.2Brush down face of brickwork to remove unwanted mortar prior to drying.

6 Clean up.

• 6.1Clear the work area, and dispose of, reuse or recycle materials following workplace and environmental requirements.
• 6.2Clean tools and equipment, check for serviceability and report damage or faults.
• 6.3Store and secure tools and equipment following workplace procedures.

What does an assessment tool for CPCCBL3003 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for CPCCBL3003 needs to address all 62 unit components: 6 elements with 27 performance criteria, 6 performance evidence requirements, 28 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for CPCCBL3003?

Auditori pulls the current release of CPCCBL3003 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for CPCCBL3003 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing CPCCBL3003 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of CPCCBL3003, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.