UETDRSO021 — Respond to protection operations
Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.
Every new account includes a free credit — no card, no subscription.
What an assessment for UETDRSO021 must cover
43 assessable components: 3 elements (16 performance criteria), 14 performance evidence and 13 knowledge evidence requirements. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.
Elements & performance criteria
1 Prepare to respond to protection operations
- 1.1Purpose of the response is established after data is analysed
- 1.2Purpose of response is communicated with relevant personnel to determine the scope of work in accordance with workplace requirements
- 1.3Hazards are identified, risks assessed, and control measures identified and applied
- 1.4Work plan for response is confirmed and communicated with relevant personnel in accordance with workplace requirements
- 1.5Work permits are determined in accordance with workplace requirements
- 1.6Response is prioritised and sequenced in accordance with workplace requirements
- 1.7Work is allocated in accordance with skills and capabilities, in accordance with workplace requirements
2 Respond to protection operations
- 2.1Work is performed in accordance with work plan and workplace requirements
- 2.2Purpose of response is reviewed and work plan is updated based on technical advice and data analysis, according to workplace requirements
- 2.3Work permits are issued in accordance with workplace requirements
- 2.4All stakeholders are updated on progress
- 2.5Hazard control measures are monitored in accordance with workplace requirements
- 2.6Incidents or unplanned events are responded to in accordance with workplace requirements
- 2.7Work progress is monitored in accordance with work plan and workplace requirements
3 Complete work and documentation
- 3.1Completed work is checked for compliance against the work plan and workplace requirements
- 3.2Work records, reports and documentation are completed, and appropriate personnel notified in accordance with workplace requirements
Performance evidence
- establishing the purpose of the response
- identifying hazards, assessing risks, and identifying, applying and monitoring control measures
- confirming, reviewing, and updating workplan, based on technical advice and data analysis
- determining and issuing work permits
- prioritising and sequencing response
- allocating work in accordance with skills and capabilities
- updating stakeholders
- dealing with an unplanned event on at least one (1) occasion
- monitoring work progress in accordance with the work plan
- checking completed work for compliance against the work plan and workplace requirements
- obtaining and issuing relevant work permits
- completing relevant work records, reports and documentation
- responding on at least three (3) occasions, to all the following: relay operations, event data, alarms
- interpreting on at least three (3) occasions, all of the following: resource capabilities, equipment capabilities, network configuration, weather
Knowledge evidence
- response purpose, sequencing and prioritisation
- operational personnel requirements and management
- hazard, risk assessment and risk control requirements, including potential hazards
- events constituting an unplanned event or incident
- procedures for responding to an unplanned event or incident
- work records, reports and documentation
- relay operations, event data and alarms
- resource and equipment capabilities, network configuration, and weather
- stakeholder communication
- purpose of a protection scheme, including: safety of persons, protection of plant, system stability, maintaining customer supply, reliability
- protection scheme principles, including: purpose of protection, protection zones, duplicate protection, backup protection, selectivity, discrimination, sensitivity, reliability
- protection scheme components, including: current and potential transformers, relays, sensors, communication
- protection scheme types, including: overcurrent, overvoltage, differential, biased differential, earth leakage, structure leakage, gas, restricted earth-fault, distance, auto-reclose, pilot wire, directional, directional overcurrent, phase comparison, current comparison
Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.
See what you get before you start
Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:
Questions about assessing UETDRSO021
What does an assessment tool for UETDRSO021 need to cover?
To satisfy the Principles of Assessment and Rules of Evidence, an assessment for UETDRSO021 needs to address all 43 unit components: 3 elements with 16 performance criteria, 14 performance evidence requirements, 13 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.
How does Auditori generate an assessment tool for UETDRSO021?
Auditori pulls the current release of UETDRSO021 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.
Is the first assessment tool really free?
Yes. Every new account includes one free credit — enough to generate the complete assessment tool for UETDRSO021 — with no card and no subscription required. After that it's pay-as-you-go per unit.
Can I check my existing UETDRSO021 assessment instead of generating a new one?
Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of UETDRSO021, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.
Related units
- UETDRSB001 — Perform substation switching operations to a given schedule
- UETDRSB002 — Commission and maintain discrete control and protection systems
- UETDRSB003 — Commission and maintain distribution field devices
- UETDRSB004 — Conduct surveys using thermovision techniques
- UETDRSB005 — Diagnose and resolve faults in a substation environment
- UETDRSB006 — Inspect substations
- UETDRSB007 — Install and maintain substation direct current systems
- UETDRSB008 — Install high current d.c. equipment and switchgear
- UETDRSB009 — Install high voltage plant and equipment
- UETDRSB010 — Maintain capacitor bank equipment
- UETDRSB011 — Maintain high current d.c. equipment and switchgear
- UETDRSB012 — Maintain high voltage circuit breakers
Your UETDRSO021 assessment tool, in minutes.
First unit free. No card, no RTO registration, no subscription.
Generate UETDRSO021 free