UETDRDU007 — Install and maintain underground public lighting

1 Prepare to install and maintain underground public lighting

• 1.1Legislation, regulations, standards, codes of practice and organisational workplace requirements for the work to be performed are referred to and confirmed
• 1.2Work plan is obtained and confirmed in accordance with workplace requirements
• 1.3Materials required for work are determined and obtained in accordance with work plan and workplace requirements
• 1.4Plant, tools, equipment and personal protective equipment (PPE) required for work are determined, obtained and confirmed in working order
• 1.5Hazards are identified, risks assessed and control measures identified and applied
• 1.6Work is prioritised and sequenced for completion in accordance with work plan and workplace requirements
• 1.7Work permits are received and signed in accordance with workplace requirements
• 1.8Worksite is prepared in accordance with the work plan and workplace requirements
• 1.9Safety observer role and responsibilities are discussed and confirmed in accordance with workplace requirements
• 1.10Communication method between the workers and safety observer is determined and confirmed in accordance with workplace requirements
• 1.11Traffic management plan is confirmed as being in place in accordance with workplace requirements

2 Carry out installation of underground public lighting

• 2.1Legislation, regulations, standards, codes of practice and organisational workplace requirements for the work to be performed are applied and monitored
• 2.2Lifting, working at heights, the use of plant, tools, equipment and PPE are carried out in accordance with workplace requirements
• 2.3Hazard control measures are monitored in accordance with workplace requirements
• 2.4Safety observer is positioned to observe the work in accordance with workplace requirements
• 2.5Communication methods between workers and safety observer are used in accordance with workplace requirements
• 2.6Excavation/foundation is inspected for compliance with the work plan and workplace requirements
• 2.7Pole/column, hardware and control equipment is assembled in accordance with the work plan and workplace requirements
• 2.8Pole/column is erected and stabilised in accordance with the work plan and workplace requirements
• 2.9Earthing is installed in accordance with the work plan and workplace requirements
• 2.10Cable is laid and connected at the pole/column connection point and at the pillar
• 2.11Public lighting is tested and commissioned in accordance with the work plan and workplace requirements
• 2.12Incidents or unplanned events are responded to in accordance with workplace requirements
• 2.13Quality checks of work are undertaken in accordance with work plan and workplace requirements

3 Carry out maintenance of underground public lighting

• 3.1Legislation, regulations, standards, codes of practice and organisational workplace requirements for the work to be performed are applied and monitored
• 3.2Lifting, working at heights, and the use of plant, tools, equipment and PPE are carried out in accordance with workplace requirements
• 3.3Hazard control measures are monitored in accordance with workplace requirements
• 3.4Safety observer is positioned to observe the work in accordance with workplace requirements
• 3.5Communication methods between workers and safety observer are used in accordance with workplace requirements
• 3.6Public lighting is inspected in accordance with workplace requirements
• 3.7Public lighting is maintained in accordance with the work plan and workplace requirements
• 3.8Incidents or unplanned events are responded to in accordance with workplace requirements
• 3.9Quality checks of work are undertaken in accordance with work plan and workplace requirements

4 Complete work and documentation

• 4.1Completed work is checked for compliance against the work plan and workplace requirements
• 4.2Incidents or unplanned events are reported in accordance with workplace requirements
• 4.3Worksite is rehabilitated, cleaned and made safe in accordance with workplace requirements
• 4.4Surplus materials are returned to storage or disposed of in accordance with workplace requirements
• 4.5Plant, tools and equipment are cleaned, checked and returned to storage in accordance with workplace requirements
• 4.6Work permits are signed off in accordance with workplace requirements
• 4.7Work records, reports and documentation are completed in accordance with workplace requirements

What does an assessment tool for UETDRDU007 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for UETDRDU007 needs to address all 50 unit components: 4 elements with 40 performance criteria, 9 performance evidence requirements, 1 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for UETDRDU007?

Auditori pulls the current release of UETDRDU007 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for UETDRDU007 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing UETDRDU007 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of UETDRDU007, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.