RIICTB304E — Install or replace sub-structure members

Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.

Generate RIICTB304E free See a real sample

Every new account includes a free credit — no card, no subscription.

What an assessment for RIICTB304E must cover

38 assessable components: 5 elements (23 performance criteria), 5 performance evidence and 7 knowledge evidence requirements, plus 3 foundation skills. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.

Elements & performance criteria

1 Plan and prepare to install or replace sub-structure members

1.1Obtain, interpret, clarify and confirm work instructions
1.2Access, interpret and apply documentation required to install or replace sub-structure members and confirm work activity is compliant
1.3Obtain and interpret emergency procedures, and identify steps required to respond to emergencies
1.4Select and wear personal protective equipment according to site requirements
1.5Confirm and identify requirements for complying with environmental protection, safety and traffic management signage requirements
1.6Identify, address and report environmental issues, potential hazards and risks
1.7Select plant, tools and equipment required to carry out tasks and check for faults
1.8Identify, confirm, and locate materials required for work application

2 Prepare for installation or replacement

2.1Assess implications of project on bridge load capacity
2.2Measure dimensions of original components
2.3Select resources according to job requirements
2.4Conduct follow up inspection of work according to job requirements

3 Erect major sub-structure members

3.1Measure and prepare major sub-structure members for installation according to job requirements
3.2Fit new members according to job requirements
3.3Apply durability treatments to new members according to job requirements
3.4Install connectors to new sub-structure members according to job requirements
3.5Remove temporary supports

4 Erect minor sub-structure member

4.1Measure and prepare minor sub-structure members for installation according to job requirements
4.2Fit new members according to job requirements
4.3Apply durability treatments to new members according to job requirements
4.4Install connectors to new sub-structure members according to job requirements

5 Conduct clean-up activities

5.1Clear work area and dispose of or recycle materials according to site requirements
5.2Clean, check, perform maintenance on and store machinery, tools and equipment according to manufacturer specifications and site requirements

Performance evidence

install or replace sub-structure members on at least two occasions, including: completing the planning, preparation and erection to design specifications of at least: one major sub-structure member, and one minor sub-structure member.
locate and apply required legislation, documentation, policies and procedures
identify, report and record hazards and risks
implement the requirements, procedures and techniques for installing or replacing sub-structure members, including: selecting and using required tools and equipment; assessing implications of project on bridge capacity; applying durability treatments
work with others to install or replace sub-structure members that meets required outcomes, including: communicating with others to receive and clarify work instructions; using communication techniques and equipment, including signage to advise others of work activity and exclusion zones.

Knowledge evidence

legislation required to install or replace sub-structure members
policies, procedures and documentation required to install or replace sub-structure members, including those relating to: site and equipment safety; hazard and risk management; emergency response; work health and safety; environmental protection; waste management; communication techniques and equipment; operational, maintenance and basic diagnostic procedures; site isolation and traffic control responsibilities; project quality requirements; job plans and specifications; site requirements; manufacturer specifications for required plant and equipment; workplace reporting requirements
principles and techniques required to install or replace sub-structure members, including those relating to: temporary support member installation and removal; major sub-structure members, including: headstocks; sills; abutments; minor sub-structure members, including: braces; wales; wing walls; pier stability and foundations; connecter behaviour; shoring and jacking systems; test boring; bridge foundations; bridge heritage; calculation of material requirements; durability treatments; bracing and loading; interpreting engineering drawings
types, characteristics, technical capabilities and limitations of plant and equipment required to install or replace sub-structure members, including: impact wrenches; electric planes; claw hammers; proprietary tools; pinch bars; oxy-acetylene equipment; rollers
materials safety data sheet (SDS) compliance processes
components of job safety analyses (JSAs), job safety environmental analyses (JSEAs), and safe work method statements (SWMs)
civil construction terminology related to installing or replacing sub-structure members.

Foundation skills

Numeracy: Calculates basic measurements including mass and dimensions
Oral communication: Identifies and interprets information from verbal instructions. Conveys information and instructions to others verbally
Self-management: Monitors and minimises own exposure to worksite risks and hazards during work activities

Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.

See what you get before you start

Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:

Questions about assessing RIICTB304E

What does an assessment tool for RIICTB304E need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for RIICTB304E needs to address all 38 unit components: 5 elements with 23 performance criteria, 5 performance evidence requirements, 7 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for RIICTB304E?

Auditori pulls the current release of RIICTB304E from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for RIICTB304E — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing RIICTB304E assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of RIICTB304E, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.

Related units

Your RIICTB304E assessment tool, in minutes.

First unit free. No card, no RTO registration, no subscription.

Generate RIICTB304E free