RIICTB202E — Apply bridge durability treatments
Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.
Every new account includes a free credit — no card, no subscription.
What an assessment for RIICTB202E must cover
77 assessable components: 4 elements (19 performance criteria), 10 performance evidence and 46 knowledge evidence requirements, plus 2 foundation skills. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.
Elements & performance criteria
1 Plan and prepare to apply durability treatment
- 1.1Obtain, interpret, clarify and confirm work instructions
- 1.2Access, interpret and apply documentation required to apply bridge durability treatments
- 1.3Obtain and interpret emergency procedures, and identify steps required to respond to emergencies
- 1.4Select and wear personal protective equipment according to site requirements
- 1.5Confirm and identify requirements for complying with environmental protection, safety and traffic management signage requirements
- 1.6Identify, address and report environmental issues, potential hazards and risks
- 1.7Select plant, tools and equipment required to carry out tasks and check for faults
- 1.8Identify, confirm, and locate materials required for work application
2 Apply protective coatings and preservatives
- 2.1Locate access devices in reach of areas to be coated according to job requirements
- 2.2Select resources according to job requirements
- 2.3Select and apply surface preparation technique according to job requirements
- 2.4Apply protective coating and preservatives to prepared area
3 Install capping
- 3.1Locate access devices in reach of areas to be capped
- 3.2Select resources, materials and equipment according to job requirements
- 3.3Prepare capping materials for installation
- 3.4Apply protective coating to surfaces to be capped according to job requirements
- 3.5Fix capping to timber members according to job requirements
4 Conduct clean-up activities
- 4.1Clear work area and dispose of or recycle materials according to site requirements
- 4.2Clean, check, perform maintenance on and store plant, tools and equipment according to manufacturer specifications and site requirements
Performance evidence
- apply bridge durability treatments on at least two occasions, including:
- applying protective coating to all surfaces of a bridge member of at least three metres in length
- applying preservatives to the end of three cut timber members and the top surface of a timber member
- preparing, making and installing a capping on the end of a timber member.
- During the above, the candidate must:
- locate and apply applicable documentation, policies and procedures
- identify, report and record hazards and risks
- work with others to apply bridge durability treatments that meets required outcomes, including:
- communicating with others to receive and clarify work instructions
- using communication techniques and equipment, including signage to advise others of work activity and exclusion zones.
Knowledge evidence
- legislation required to apply bridge durability treatments
- policies, procedures and documentation required to apply bridge durability treatments, including those relating to:
- site and equipment safety
- hazard and risk management
- emergency response
- environmental protection
- waste management
- communication techniques and equipment
- project quality requirements
- working safely at heights and over water
- operational, maintenance and basic diagnostic procedures
- site isolation and traffic control responsibilities
- job plans and specifications
- site requirements
- manufacturer specifications for required plant and equipment
- workplace reporting requirements
- principles and techniques required to apply bridge durability treatments, including those relating to:
- timber bridge durability treatment application
- preservatives
- protective coatings
- surface preparation, including:
- abrasive blasting
- wire brushing
- manual or electric sanding and grinding
- termite barriers
- waterproofing
- timber deterioration
- bridge foundations
- bridge heritage
- access devices
- calculation of material requirements
- surface preparation
- flashing and capping
- types, characteristics, technical capabilities and limitations of plant and equipment required to apply bridge durability treatment including:
- generators
- power leads
- compressors
- electric drills
- augers
- abrasive blasting equipment
- elevated work platforms
- spray equipment
- scaffolding
- materials safety data sheet (SDS) compliance processes
- components of job safety analyses (JSAs), job safety environmental analyses (JSEAs), and safe work method statements (SWMs)
- civil construction terminology relating to applying bridge durability treatments.
Foundation skills
- Oral communication: Identifies and interprets information from verbal instructions Conveys information and instructions to others verbally
- Self-management: Monitors and minimises own exposure to worksite risks and hazards during work activities
Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.
See what you get before you start
Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:
Questions about assessing RIICTB202E
What does an assessment tool for RIICTB202E need to cover?
To satisfy the Principles of Assessment and Rules of Evidence, an assessment for RIICTB202E needs to address all 77 unit components: 4 elements with 19 performance criteria, 10 performance evidence requirements, 46 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.
How does Auditori generate an assessment tool for RIICTB202E?
Auditori pulls the current release of RIICTB202E from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.
Is the first assessment tool really free?
Yes. Every new account includes one free credit — enough to generate the complete assessment tool for RIICTB202E — with no card and no subscription required. After that it's pay-as-you-go per unit.
Can I check my existing RIICTB202E assessment instead of generating a new one?
Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of RIICTB202E, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.
Related units
- RIICTB201E — Maintain timber bridges
- RIICTB203E — Produce bridge drawings and sketches
- RIICTB301E — Undertake visual inspections
- RIICTB302E — Install temporary support members
- RIICTB303E — Erect temporary modular support systems (baileys) on existing bridges
- RIICTB304E — Install or replace sub-structure members
- RIICTB305E — Install or replace super-structure members
- RIICTB306E — Splice and connect timber members
- RIICTB307E — Assemble and disassemble temporary modular bridges
- RIICTB308E — Install or replace truss members
- RIICTB309E — Construct, maintain and remove coffer dams
- RIICTB310E — Construct specialised timber deck systems
Your RIICTB202E assessment tool, in minutes.
First unit free. No card, no RTO registration, no subscription.
Generate RIICTB202E free