Auditori
Get started

PMASUP244 — Prepare and isolate plant

Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.

Generate PMASUP244 freeSee a real sample

Every new account includes a free credit — no card, no subscription.

What an assessment for PMASUP244 must cover

52 assessable components: 3 elements (26 performance criteria), 6 performance evidence and 20 knowledge evidence requirements. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.

Elements & performance criteria

1 Perform the isolations

  • 1.1Communicate with panel operator and other stakeholders
  • 1.2Execute authorised isolation plan
  • 1.3Remove materials and energy, as required
  • 1.4Control any releases to the environment in accordance with plant procedures
  • 1.5Prove the effectiveness of the isolation
  • 1.6Decontaminate plant and equipment, as required
  • 1.7Recognise and take action on any inconsistencies
  • 1.8Test for residual hazards
  • 1.9Complete required paperwork
  • 1.10Sign-off isolations, as required
  • 1.11Hand over to/from shift, as required

2 Prepare plant for the work

  • 2.1Execute authorised preparation plan
  • 2.2Recognise and take action on any inconsistencies
  • 2.3Confirm plant is ready for the work
  • 2.4Hand over plant to the work party
  • 2.5Monitor work and plant, as required

3 Prepare plant for return to service

  • 3.1Confirm work is complete and site/plant has been left in acceptable condition
  • 3.2Accept handover from work party
  • 3.3Obtain authority to de-isolate
  • 3.4Execute authorised de-isolation plan
  • 3.5Sign off the de-isolation, as required
  • 3.6Reverse purge as required by plan for return to service
  • 3.7Execute authorised plan for return to service
  • 3.8Test readiness for return to service
  • 3.9Advise plant is ready for service
  • 3.10Complete required paperwork

Performance evidence

  • implement prepared isolation/de-isolation plan
  • read and interpret technical documentation and drawings/graphics
  • interpret safety data sheets (SDS)
  • undertake tests and interpret test results
  • complete required paperwork
  • apply procedures to control releases and remove energy and materials

Knowledge evidence

  • isolation philosophy of organisation
  • isolation and preparation plan for work
  • plant energy sources and their methods of being de-energised and isolated
  • hierarchy of isolations
  • methods of proving isolations
  • methods and equipment used for purging and ventilation
  • decontamination methods and requirements for various materials and situations
  • as low as reasonably practicable (ALARP) concept
  • importance of appropriate rates of change for pressure and temperature for vessels and other plant
  • significance of time allowed for draining, purging and ventilation
  • fluid dynamics relating specifically to draining piping systems, including:
  • the ability of a liquid to ‘hang-up’ in pipework, the importance of identifying high point vents to release gas/vapours and low point drains to release liquids
  • determining the amount of liquid drained from a piping section to ascertain that draining has been effective/prove drainage
  • the potential effects (e.g. damage to tanks or vessels) of vacuum by not draining correctly (e.g. by pulling a vacuum behind a slug of liquid)
  • organisation procedures, including those covering:
  • safety, emergency and hazard control
  • work permit systems
  • communications
  • environmental management
  • standard operating procedures (SOPs)

Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.

See what you get before you start

Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:

Questions about assessing PMASUP244

What does an assessment tool for PMASUP244 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for PMASUP244 needs to address all 52 unit components: 3 elements with 26 performance criteria, 6 performance evidence requirements, 20 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for PMASUP244?

Auditori pulls the current release of PMASUP244 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for PMASUP244 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing PMASUP244 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of PMASUP244, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.

Related units

Your PMASUP244 assessment tool, in minutes.

First unit free. No card, no RTO registration, no subscription.

Generate PMASUP244 free