ICTDRE301 — Install digital reception equipment

1 Prepare for installation

• 1.1Obtain relevant legislation, codes, regulations and standards for compliance when conducting work
• 1.2Notify customer to verify installation order and arrange for site access to comply with security arrangements
• 1.3Notify supervisor of identified safety hazards at the worksite and complete a job safety analysis (JSA) before commencing work
• 1.4Confirm location of digital reception equipment and fittings with customer
• 1.5Identify barriers to installation and develop strategies to overcome them within time and budget restrictions
• 1.6Select and obtain tools and materials appropriate for the work order

2 Install hardware and equipment

• 2.1Measure signal level at wall plate to ensure received signal strength is adequate
• 2.2Test customer’s existing equipment for operational condition and reception quality
• 2.3Notify customer of detected problems and record remedial actions if required
• 2.4Identify interconnection cabling requirements and prepare cables for job requirements
• 2.5Affix wall plate to agreed position on wall and secure cable according to specification
• 2.6Connect set top unit to customer equipment and connect cabling between wall plate and set top unit following work health and safety (WHS) and environmental requirements
• 2.7Power up set top unit and configure it to customer requirements
• 2.8Activate customer services to complete hardware installation where required

3 Commission and test installation

• 3.1Conduct functional test to assess transmission signal quality
• 3.2Conduct tests to ensure quality of all services are being delivered against enterprise quality standards
• 3.3Check all interconnected equipment is functional

4 Finalise installation and handover to customer

• 4.1Restore site to original condition and customer satisfaction
• 4.2Assess damages that may have occurred during installation and arrange with customer for repair or replacement of damaged components
• 4.3Remove waste and debris from site and dispose of in a safe and environmentally appropriate manner
• 4.4Conduct customer training appropriate to equipment, services and vendor literature

5 Complete contract documentation

• 5.1Provide warranties to customer in required format where work and equipment are subject to warranty
• 5.2Prepare invoices and other financial documentation, where required, and present to customer
• 5.3Obtain authorised signatures on required documentation to confirm acceptance of completed work

What does an assessment tool for ICTDRE301 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for ICTDRE301 needs to address all 51 unit components: 5 elements with 24 performance criteria, 6 performance evidence requirements, 14 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for ICTDRE301?

Auditori pulls the current release of ICTDRE301 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for ICTDRE301 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing ICTDRE301 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of ICTDRE301, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.