ICPCBF3260 — Undertake pre make-ready for die cutting

Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.

Generate ICPCBF3260 free See a real sample

Every new account includes a free credit — no card, no subscription.

What an assessment for ICPCBF3260 must cover

36 assessable components: 5 elements (15 performance criteria), 2 performance evidence and 15 knowledge evidence requirements, plus 4 foundation skills. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.

Elements & performance criteria

1 Prepare for job

1.1Identify job specifications
1.2Locate existing formes and collect new formes and required tooling
1.3Check accuracy of cut and fold for cutting for me and tooling against master sample
1.4Locate and check accuracy of centre line according to positioning and registration requirements

2 Position and set up counters

2.1Locate cutting plate and prepare for counters
2.2Position and set up counters on cutting plate and confirm registration with cutting forme

3 Produce sample cut

3.1Position cutting forme and cutting plate on machine according to job requirements
3.2Operate machine to produce sample according to enterprise procedures
3.3Cut sample and confirm precise registration of tooling
3.4Adjust forme and tooling as required according to job specifications
3.5Obtain approval of sample from designated person

4 Set up stripping forme and blank separator

4.1Position pins on stripping forme and confirm accurate removal of waste board
4.2Set up blank separator according to job specifications

5 Undertake filing procedure

5.1Allocate and record identification number for cutting formes, tooling and strippers
5.2Enter information into filing system according to enterprise procedures

Performance evidence

prepare four cutting formes, two large and two small, to accommodate two different complexities of cutting.
prepare attachment stripper materials.

Knowledge evidence

work health and safety (WHS) requirements for: handling and setting blades
registration requirements
checks required to position bridge holes
procedure for reinforcing bridge holes
checks to perform to ensure saw cuts match line drawings
checks when cutting and shaping the knives and creasers
key factors that determine amount and positioning of rubber attached to the forme
factors to consider when setting knives and creasers into position on the forme blank
checks for attaching stripping materials to stripper backing materials
the purpose of mounting strips
areas to proof to ensure cutting forme meets job specifications
the allocation of numbers to each forme
the required method of recording forme allocation numbers
filing system and enterprise procedures for entering information
manufacturer manuals, enterprise procedures and work health and safety documentation, including their location and purpose.

Foundation skills

Reading: Identifies and interprets text to establish job requirements
Writing: Gathers information from a range of sources to record using headings, instructions and layout to meet needs of audience and purpose of text
Self-management: Identifies and follows organisational procedures relevant to own role
Planning and organising: Plans, identifies and assembles resources required to complete tasks Implements actions as per plan, making accurate adjustments as necessary Takes responsibility for planning and organising own workload, identifying ways of sequencing and combining elements for greater efficiency

Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.

See what you get before you start

Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:

Questions about assessing ICPCBF3260

What does an assessment tool for ICPCBF3260 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for ICPCBF3260 needs to address all 36 unit components: 5 elements with 15 performance criteria, 2 performance evidence requirements, 15 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for ICPCBF3260?

Auditori pulls the current release of ICPCBF3260 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for ICPCBF3260 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing ICPCBF3260 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of ICPCBF3260, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.

Related units

Your ICPCBF3260 assessment tool, in minutes.

First unit free. No card, no RTO registration, no subscription.