ICPCBF2310 — Set up machine for basic flat-bed cutting

Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.

Generate ICPCBF2310 free See a real sample

Every new account includes a free credit — no card, no subscription.

What an assessment for ICPCBF2310 must cover

35 assessable components: 6 elements (17 performance criteria), 1 performance evidence and 12 knowledge evidence requirements, plus 5 foundation skills. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.

Elements & performance criteria

1 Prepare for job

1.1Identify job specifications
1.2Carry out set-up of required machinery according to manufacturer specifications
1.3Confirm availability of all job related components

2 Mount flat-bed cutting devices

2.1Mount cutting devices
2.2Register and proof cutting devices
2.3Select and secure cutting devices to machine according to job specifications

3 Prepare delivery systems

3.1Set up and adjust delivery systems
3.2Add substrate to and remove substrate from process

4 Set up machine

4.1Set up and adjust flat-bed cutting devices
4.2Check and adjust cutting pressures
4.3Set machine lays to required position for registration

5 Set-up for other in-line processes

5.1Provide assistance in set-up of major in-line units
5.2Set up minor in-line printing processes

6 Conduct sample run

6.1Set up and operate machine to produce a specified sample according to work health and safety (WHS) requirements, manufacturer specifications and enterprise procedures
6.2Inspect and test sample as required according to enterprise procedures
6.3Interpret results and determine adjustment requirements
6.4Carry out adjustment changes according to product and machine specifications

Performance evidence

Demonstrate any three cutting processes, including relevant minor in-line processes, and for each process: demonstrate all safety devices on the machinery; set up machinery for basic flat-bed cutting for two jobs; and change the type and size of substrates and design of finished patterns according to manufacturer and job specifications and enterprise procedures.

Knowledge evidence

work health and safety (WHS) risks and requirements for: set up of cutting devices; set up and operation of delivery systems
the checks required for cutting devices when mounted on a cylinder and attached to a machine
the checks required for substrate removal from the machine
the information found in the job documentation and production control system
adjustable areas of the reel delivery system
webbing configuration requirements
areas requiring continuous monitoring to ensure system operates as required
determination criteria for machine pressure and cutting depths
the procedure for securing the finished product for dispatch
quality criteria for completed sample to examine against client requirements
cutting tool and equipment storage and its uses
manufacturer manuals, enterprise procedures and work health and safety documentation, including their location and purpose

Foundation skills

Reading: Identifies and interprets texts to establish job requirements
Self-management: Complies with regulatory requirements and follows organisational procedures relevant to own role
Teamwork: Cooperates with others as part of familiar routine activities, and contributes to specific activities requiring joint responsibility and accountability
Planning and organising: Determines priorities and sequences steps involved in clearly defined tasks • Implements actions as per instructions, making slight adjustments if necessary • Plans, identifies and assembles resources required to complete tasks
Technology: Follows routine procedures for using digital technology by reading data from electronic monitoring and control systems

Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.

See what you get before you start

Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:

Questions about assessing ICPCBF2310

What does an assessment tool for ICPCBF2310 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for ICPCBF2310 needs to address all 35 unit components: 6 elements with 17 performance criteria, 1 performance evidence requirements, 12 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for ICPCBF2310?

Auditori pulls the current release of ICPCBF2310 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for ICPCBF2310 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing ICPCBF2310 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of ICPCBF2310, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.

Related units

Your ICPCBF2310 assessment tool, in minutes.

First unit free. No card, no RTO registration, no subscription.