CPCCRT3003 — Repair and replace valleys, valley irons and flashings

1 Plan and prepare to repair and replace valleys, valley irons and flashings.

• 1.1Read and interpret work instructions and plan sequence of work.
• 1.2Plan all work to comply with laws and regulations, the National Construction Code (NCC), Australian Standards, work health and safety (WHS) and environmental requirements, manufacturers’ specifications and workplace requirements.
• 1.3Select and use personal protective equipment (PPE) for each stage of the task.
• 1.4Inspect work site, assess hazards and apply risk controls, including required signage and barricades.
• 1.5Select tools and equipment, check for serviceability and report any faults.
• 1.6Select materials required for task, calculate quantities, handle safely and prepare and position ready for use.

2 Prepare valley section for repair.

• 2.1Locate damaged area from plans and specifications.
• 2.2Check that fall safety devices have been installed correctly.
• 2.3Identify tiles to be repaired or replaced from a removed sample.
• 2.4Remove damaged tiles with minimum disturbance to remaining roof tiles.
• 2.5Relocate existing tiles to blend aesthetically with new tiles.
• 2.6Remove pointing or bedding over valley irons, flashings and affected roof tiles without damage.
• 2.7Clean damaged area and remove waste.
• 2.8Check roof structure valleys and flashing installations for soundness and adequacy.

3 Repair valley sections.

• 3.1Repair/replace damaged structural components of valley section of roof.
• 3.2Replace/install roof tie down fixings to roof structure.
• 3.3Fabricate and install valley flashings.

4 Install roof tiles to valley and flashing sections.

• 4.1Inspect each replacement tile for match to original tiles.
• 4.2Mix bedding to Australian Standards.
• 4.3Lay tiles to existing design, gauge, alignment and bond specifications.

5 Apply bedding and pointing material.

• 5.1Apply bedding and pointing/storm seal material to Australian Standards.
• 5.2Point joints/collars to match finish to existing surrounds.

6 Clean up.

• 6.1Remove loose material from roof tile surface, clear work area, dispose of materials, and reuse or recycle in compliance with legislation, regulations and codes of practice.
• 6.2Clean, check, maintain and store tools and equipment in accordance with manufacturers’ specifications.

What does an assessment tool for CPCCRT3003 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for CPCCRT3003 needs to address all 53 unit components: 6 elements with 24 performance criteria, 14 performance evidence requirements, 15 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for CPCCRT3003?

Auditori pulls the current release of CPCCRT3003 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for CPCCRT3003 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing CPCCRT3003 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of CPCCRT3003, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.