UEGNSG703 — Fault find and repair data logging equipment

Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.

Generate UEGNSG703 free See a real sample

Every new account includes a free credit — no card, no subscription.

What an assessment for UEGNSG703 must cover

77 assessable components: 3 elements (20 performance criteria), 26 performance evidence and 31 knowledge evidence requirements. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.

Elements & performance criteria

1 Prepare to find and repair faults

1.1Work health and safety (WHS)/occupational health and safety (OHS) requirements and workplace procedures for relevant work area are identified, obtained and applied
1.2Instructions for the work are obtained and confirmed with relevant person/s in accordance with workplace procedures and manufacturer instructions
1.3Nature of the fault is obtained from documentation and/or from relevant person/s to determine scope of work
1.4Relevant work permit/authorisations are obtained and confirmed with relevant person/s in accordance with job requirements and workplace procedures
1.5Location and access to equipment is organised and confirmed
1.6Materials required for the work are determined in accordance with workplace procedures
1.7Tools, equipment and testing devices required for work are obtained in accordance with workplace procedures and checked for correct operation and safety

2 Find and repair faults

2.1WHS/OHS risk control measures, schedule of work and workplace procedures for carrying out work are followed
2.2Stray current testing and protection is undertaken in accordance with industry standards, regulations and workplace procedures
2.3Data logging equipment is checked and isolated, if required, in accordance with WHS/OHS requirements and workplace procedures
2.4Fault finding and repairs are undertaken correctly and safely in accordance with manufacturer instructions and workplace procedures
2.5Data logging components are disconnected, de-energised, serviced, replaced and recommissioned, as necessary, and parts returned as required
2.6The repair is tested in accordance with workplace procedures
2.7Unplanned events are dealt with in consultation with relevant person/s and in accordance with workplace procedures and manufacturer instructions

3 Complete and report repair activities

3.1WHS/OHS work completion risk control measures and workplace procedures are followed
3.2Final checks are performed to ensure quality of work complies with manufacturer instructions, industry standards and regulations
3.3Equipment, tools and any surplus resources and materials are cleaned, checked and stored securely or disposed of in accordance with workplace procedures
3.4Work area is tidied and made safe in accordance with job instructions and workplace procedures
3.5Work completion reporting is conducted and relevant person/s notified in accordance with workplace procedures
3.6Malicious and/or third-party damage is reported in accordance with workplace procedures

Performance evidence

applying methodical fault-finding techniques
applying relevant work health and safety (WHS)/occupational health and safety (OHS) requirements, including:
hazard identification and reporting
implementing risk control measures
recognising hazard warnings and safety signs
selecting and using relevant personal protective equipment (PPE)
communicating effectively with relevant personnel and customers
completing work and relevant documentation
coordinating work with relevant person/s
dealing with unplanned events/situations in accordance with workplace procedures in a manner that minimises risk to personnel and equipment
finding and repairing faults to components without damage, including:
de-energising
disconnecting
recommissioning
replacing
servicing
following manufacturer instructions
following work schedule, safety plan and job requirements
following workplace policies and procedures
jointing and terminating wiring for data logging equipment safely and correctly according to manufacturers’ instructions and industry standards
maintaining a clean and safe work site
performing quality, safety and final checks
performing stray current testing and protection
referring issues
using materials, tools, equipment and testing devices
using relevant communication devices, including smartphones and laptops.

Knowledge evidence

communication skills to liaise with internal and external person/s
customer metering systems and components, including:
circuit boards
componentry and connections
diagnostic processes
meters
version updates/upgrades
quality, safety and final checks
relevant legislation, industry standards, guidelines, codes of practice and regulations
relevant manufacturer instructions
relevant permits required
relevant safe work method statements (SWMS)/job safety assessments or risk mitigation processes
relevant tools, equipment and devices, including:
cable tracers
multimeters
smartphones and laptops
testing equipment
wire jointing equipment
relevant WHS/OHS policies and procedures, including:
environmental and safety hazards
hazard identification
hazard warnings and safety signs
relevant PPE
risk assessment and control measures
security requirements for entering domestic and commercial customer sites
relevant WHS/OHS legislated requirements
relevant workplace documentation, forms, reports and manuals, including paper based and electronic types
relevant workplace policies and procedures
site and data issues
site preparation, work schedules, safety plans and job requirements
stray current testing and protection.

Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.

See what you get before you start

Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:

Questions about assessing UEGNSG703

What does an assessment tool for UEGNSG703 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for UEGNSG703 needs to address all 77 unit components: 3 elements with 20 performance criteria, 26 performance evidence requirements, 31 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for UEGNSG703?

Auditori pulls the current release of UEGNSG703 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for UEGNSG703 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing UEGNSG703 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of UEGNSG703, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.

Related units

Your UEGNSG703 assessment tool, in minutes.

First unit free. No card, no RTO registration, no subscription.

Generate UEGNSG703 free