UEGNSG017 — Fill by weight industrial gas cylinders

1 Prepare to fill industrial gas cylinders

• 1.1Workplace safety, environmental and sustainable energy practices for the site are identified, obtained and understood
• 1.2Job requirements are obtained and interpreted from plans, specifications and instructions
• 1.3Relevant job requirements and workplace procedures for work activities are discussed with relevant person/s, including third parties, to determine and confirm work schedule and respective responsibilities
• 1.4Recommendations to assist with the filling of gas cylinders are made to others involved in the work in accordance with workplace procedures
• 1.5Hazards are identified, workplace safety and environmental risks are assessed, and control measures are prioritised, implemented and monitored in accordance with workplace procedures
• 1.6Scope of responsibility under the relevant job requirements, including all work permits and/or relevant notifications, is determined and confirmed to access the services and perform work in accordance with job requirements and workplace procedures
• 1.7Equipment, tools and personal protective equipment (PPE) needed to carry out work activities are identified, obtained and checked for correct operation and safety in accordance with workplace procedures and manufacturer instructions
• 1.8Hazards are identified, workplace safety and environmental risks are assessed, and control measures are prioritised, implemented and monitored in accordance with workplace procedures

2 Inspect and fill by weight industrial gas cylinders

• 2.1Workplace safety and environmental risk control measures, schedule of work and workplace procedures for carrying out work are followed
• 2.2Appropriate materials, tools and equipment are selected and used safely in accordance with manufacturer instructions and workplace procedures
• 2.3Work is completed within agreed timeframe and to industry standards in accordance with job requirements and workplace procedures
• 2.4Cylinders are inspected in accordance with job instructions, industry standards, regulations and workplace procedures
• 2.5Cylinders with defects, including leaks and damage, are identified, marked and quarantined and hazards and workplace safety risks are reported to authorised person/s for directions in accordance with workplace procedures
• 2.5Filling of gas cylinders is carried out in accordance with job instructions, industry standards, regulations and workplace procedures
• 2.6Problems associated with the filling of gas cylinders are dealt with by using problem-solving techniques in accordance with workplace procedures, industry standards and regulations
• 2.8Unplanned events and non-routine problems are identified and actioned in accordance with workplace procedures

3 Complete work and relevant documentation

• 3.1Appropriate manual handing techniques are applied when moving full cylinders to designated storage areas or onto vehicles
• 3.2Workplace safety risk control measures for work completion are followed
• 3.3Quality and safety checks of the work are conducted in accordance with job requirements, workplace procedures and community and industry standards
• 3.4Worksite is cleaned, reinstated and made safe in accordance with workplace procedures
• 3.5Tools, equipment and any surplus resources/materials are cleaned, checked and securely stored in accordance with workplace procedures
• 3.6Incidents are reported and followed up as required in accordance with workplace procedures
• 3.7Relevant person/s is notified of work completion in accordance with workplace procedures
• 3.8Work completion documentation is completed accurately and provided to relevant person/s in accordance with workplace procedures

What does an assessment tool for UEGNSG017 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for UEGNSG017 needs to address all 65 unit components: 3 elements with 24 performance criteria, 21 performance evidence requirements, 20 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for UEGNSG017?

Auditori pulls the current release of UEGNSG017 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for UEGNSG017 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing UEGNSG017 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of UEGNSG017, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.