UEGNSG702 — Disconnect and reconnect small capacity gas meters

1 Prepare to disconnect, replace and reconnect gas meters

• 1.1Instructions for the work are obtained and confirmed with relevant person/s in accordance with workplace procedures
• 1.2Job requirements and workplace procedures for the work are discussed with relevant person/s to confirm the work schedule
• 1.3Work health and safety (WHS)/occupational health and safety (OHS), environmental and sustainable energy measures and workplace policies and procedures are obtained and applied
• 1.4Hazards are identified, WHS/OHS risks assessed and control measures prioritised, implemented and monitored in accordance with workplace procedures
• 1.5Scope of responsibility under the relevant work permit/authorisations is obtained and confirmed with relevant person/s in accordance with job requirements and workplace procedures
• 1.6Resources, including equipment, tools, materials and personal protective equipment (PPE), required to undertake gas meter work are identified, obtained and checked for correct operation and safety in accordance with workplace procedures and manufacturer instructions
• 1.7Responsibilities for work safety and emergency procedures at the work site are confirmed with relevant person/s in accordance with job requirements and workplace procedures
• 1.8Relevant persons are consulted to ensure the appliance relight is coordinated effectively with others involved
• 1.9Issues are referred to appropriate person/s in accordance with industry standards and workplace procedures
• 1.10Work site is prepared, safety plan and work schedule are confirmed with relevant person/s in accordance with workplace procedures

2 Disconnect, replace and reconnect gas meters

• 2.1WHS/OHS risk control measures, schedule of work and workplace procedures for carrying out work are followed
• 2.2Materials, tools, equipment and devices to perform gas meter work are selected and used correctly and safely in accordance with manufacturer instructions and workplace procedures
• 2.3Operational knowledge for utilising correct and safe use of basic equipment and tools to perform gas meter work is confirmed
• 2.4Gas meter work is undertaken using stray current testing and protection in accordance with industry standards, regulations and workplace procedures
• 2.5Customer piping system, meter connections, filters, regulators and associated components are tested for gas tightness in accordance with industry standards, regulations and workplace procedures
• 2.6Work is carried out to the required quality standard, without damage to apparatus, equipment, and the surrounding environment or services
• 2.7Hazard warnings and safety signs are recognised, hazards assessed and WHS/OHS risks reported to authorised person/s for directions in accordance with workplace procedures
• 2.8Unplanned events are referred to relevant person/s for further instructions in accordance with workplace procedures
• 2.9Quality and safety checks of the work are undertaken in accordance with job instructions, industry standards and workplace procedures
• 2.10Gas meters, filters and regulators are stored and transported in accordance with workplace procedures and manufacturer instructions

3 Complete work and relevant documentation

• 3.1WHS/OHS risk control measures for work completion measures and procedures are followed
• 3.2Final checks, including visual observation, are performed to ensure quality of work complies with manufacturer instructions, industry standards and regulations
• 3.3Relevant person/s are notified of work completion in accordance with workplace procedures
• 3.4Equipment, tools and any surplus resources and materials are cleaned, checked and stored securely or disposed of in accordance with workplace procedures
• 3.5Work area is tidied and made safe in accordance with job instructions and workplace procedures
• 3.6Meter details and readings, work completion records and documentation are completed in accordance with job instructions and workplace procedures

What does an assessment tool for UEGNSG702 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for UEGNSG702 needs to address all 74 unit components: 3 elements with 26 performance criteria, 22 performance evidence requirements, 26 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for UEGNSG702?

Auditori pulls the current release of UEGNSG702 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for UEGNSG702 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing UEGNSG702 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of UEGNSG702, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.