UEGNSG509 — Remotely monitor and operate gas transmission flow and pressure measuring and regulating devices

1 Prepare to monitor gas flow control and pressure measuring and regulating device remotely

• 1.1Work requirements for monitoring and operating complex gas flow control, pressure measuring and regulating device are interpreted from schedules, plan/s, specifications and instructions
• 1.2Relevant gas supply monitoring requirements and workplace procedures for work are communicated to relevant person/s
• 1.3Work health and safety (WHS)/occupational health and safety (OHS), environmental and sustainable energy workplace policies and procedures related to gas supply monitoring and operating of complex gas flow controls are obtained and confirmed
• 1.4Work activities are prioritised and sequenced following consultation with relevant person/s for completion within acceptable timeframes and in accordance with workplace procedures
• 1.5WHS/OHS and environmental risk control measures for identified hazards are prioritised, implemented and monitored
• 1.6Relevant work permits are obtained to access, isolate/de-energise systems, as required, and work activities performed in accordance with job requirements and workplace procedures
• 1.7Liaison and communication with authorised person/s, authorities, clients and land owners are undertaken to resolve gas supply issues and work activities monitored in accordance with workplace procedures
• 1.8Person/s participating in work activities are fully briefed and respective responsibilities confirmed, as required, in accordance with workplace procedures
• 1.9Third-party issues are referred to appropriate person/s in accordance with workplace procedures

2 Monitor gas flow control and pressure measuring and regulating device system performance remotely

• 2.1WHS/OHS and environmental workplace policies, procedures and safe work practices are followed to eliminate or minimise risk of harm from incidents and hazards
• 2.2Information on gas supply device and equipment performance is collected and reported in accordance with organisational requirements
• 2.3Dealings with customers are consistent with workplace procedures and the specific needs of customer/s are identified and considered in targeting client service
• 2.4Routine checks of system are scheduled and monitored in accordance with the work schedule and workplace procedures
• 2.5Hazard warnings and safety signs are recognised and hazards are identified, assessed and WHS/OHS risks are reported to the authorised person/s for directions in accordance with workplace procedures
• 2.6Unplanned events are responded to in accordance with levels of responsibility and emergency response procedures
• 2.7System performance data and usage is collected, analysed and reported with any unplanned events from remote monitoring operation of complex gas flow control in accordance with workplace procedures
• 2.8Samples are taken in accordance with workplace procedures and known solutions to a variety of problems are applied
• 2.9Ongoing checks of quality of work are undertaken in accordance with given instructions and workplace procedures

3 Control and adjust gas flows and complete records and reports

• 3.1Gas flow and overflow regulating systems are checked and adjusted to meet demand and customer requirements
• 3.2Incidents and injuries are reported in accordance with workplace procedures, as required
• 3.3Gas flows and diversion/s are determined to facilitate repair or emergency activities in accordance with organisational requirements
• 3.4Process faults and operational conditions of the gas transmission system are identified, addressed and reported in accordance with organisational requirements
• 3.5Relevant work permit/s are signed off in accordance with job requirements
• 3.6Work completion records, reports and documentation are finalised and processed and appropriate person/s notified

What does an assessment tool for UEGNSG509 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for UEGNSG509 needs to address all 46 unit components: 3 elements with 24 performance criteria, 8 performance evidence requirements, 14 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for UEGNSG509?

Auditori pulls the current release of UEGNSG509 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for UEGNSG509 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing UEGNSG509 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of UEGNSG509, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.