UEGNSG304 — Commission or decommission gas transmission pipelines

1 Plan to commission/decommission gas transmission pipelines

• 1.1Work schedule/s, drawings, plans, job requirements and material lists are obtained, analysed and confirmed if necessary by site inspection in accordance with workplace procedures
• 1.2Work health and safety (WHS)/occupational health and safety (OHS) workplace policies and procedures for the sites are identified, obtained and applied
• 1.3Job requirements and workplace procedures are obtained for all work sites and communicated to relevant person/s in accordance with workplace procedures
• 1.4Environmental and sustainable energy policies and procedures are obtained, communicated and applied
• 1.5Work is prioritised and sequenced by management for completion within acceptable timeframes following consultation with relevant person/s in accordance with workplace procedures
• 1.6Hazards are identified, WHS/OHS risks are assessed and control measures prioritised, implemented and monitored in accordance with workplace procedures
• 1.7Relevant work permit/s are obtained to access, isolate/de-energise systems and perform work in accordance with regulatory requirements and workplace procedures
• 1.8Scope of work and level of responsibility under the relevant work permit/authorisation is confirmed with relevant person/s in accordance with job requirements and workplace procedures
• 1.9Person/s, equipment, tools, materials, plans, specifications and personal protective equipment (PPE) required for the work are identified, scheduled, obtained and checked for correct operation and safety in accordance with workplace procedures
• 1.10First aid officer at the work site is confirmed with relevant person/s in accordance with job requirements and workplace procedures
• 1.11Communication issues with relevant stakeholders are resolved and work coordinated by management in accordance with work schedule and workplace procedures
• 1.12Pipeline is cleaned, pigged, bypassed and checked for commissioning/decommissioning readiness in accordance with workplace procedures
• 1.13Site is prepared to minimise risk and damage to property, commerce and individuals in accordance with the work schedule and workplace procedures
• 1.14Person/s participating in the work are briefed and responsibilities confirmed in accordance with job requirements and workplace procedures
• 1.15Road signs, barriers and warning devices are positioned in accordance with job requirements and traffic management plan

2 Commission/decommission gas transmission pipelines

• 2.1WHS risk control measures, schedules of work and workplace procedures for carrying out work are followed
• 2.2Materials, tools, equipment and measuring devices required for the work are selected and used correctly and safely in accordance with manufacturer instructions and workplace procedures
• 2.3Hazardous activities are conducted safely in accordance with WHS/OHS workplace procedures, job instructions and regulatory requirements
• 2.4Commissioning/decommissioning gas transmission pipelines is performed in agreed timeframe and to industry standards with a minimum of waste or damage to apparatus, circuits, and the surrounding environment or services using sustainable energy principles
• 2.5Commissioning/decommissioning gas transmission pipelines is performed in accordance with work schedule, job requirements and workplace procedures
• 2.6Hazard warnings and safety signs are recognised, hazards and WHS/OHS risks assessed and incidents reported to authorised person/s for directions in accordance with workplace procedures
• 2.7Adjustments are made for unplanned events when commissioning/decommissioning gas transmission pipelines in accordance with workplace procedures
• 2.8Unplanned events and non-routine problems are referred to authorised person/s for directions in accordance with workplace procedures
• 2.9Relevant reports and quality and safety checks of the work are conducted in accordance with job requirements and workplace procedures

3 Complete work and relevant documentation

• 3.1WHS/OHS risk control measures and procedures for completing the work are followed
• 3.2Testing is conducted using relevant tools/equipment and work checked for conformance with job requirements and anomalies reported in accordance with workplace procedures
• 3.3Accidents and injuries are reported in accordance with requirements and workplace procedures
• 3.4Work site is rehabilitated, cleaned up and made safe in accordance with workplace procedures
• 3.5Tools, equipment and any surplus resources and materials are cleaned, checked and stored securely in accordance with workplace procedures
• 3.6Relevant work permit/s are signed off and equipment returned to service in accordance with workplace procedures, job and regulatory requirements
• 3.7Final inspections are undertaken and work completion documentation is finalised, processed and provided to appropriate person/s in accordance with workplace procedures

What does an assessment tool for UEGNSG304 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for UEGNSG304 needs to address all 82 unit components: 3 elements with 31 performance criteria, 24 performance evidence requirements, 27 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for UEGNSG304?

Auditori pulls the current release of UEGNSG304 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for UEGNSG304 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing UEGNSG304 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of UEGNSG304, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.