UEGNSG025 — Monitor and operate complex flow control, measuring and regulating devices

1 Prepare to monitor and operate gas flow control, measuring and regulating devices

• 1.1Workplace safety, environmental and sustainable energy practices for the site are identified, obtained and understood
• 1.2Job requirements are obtained and interpreted from plans, specifications and instructions
• 1.3Relevant job requirements and workplace procedures for work activities are discussed with relevant person/s, including third parties, to determine and confirm work schedule and respective responsibilities
• 1.4Hazards are identified, workplace safety and environmental risks are assessed, and control measures are prioritised, implemented and monitored in accordance with workplace procedures
• 1.5Scope of responsibility under the relevant job requirements, including all work permits and/or relevant notifications, is determined and confirmed to access the services and perform work in accordance with job requirements and workplace procedures
• 1.6Equipment, tools and personal protective equipment (PPE) needed to carry out work activities are identified, obtained and checked for correct operation and safety in accordance with workplace procedures and manufacturer instructions
• 1.7Materials, plans, diagrams, drawings and resources required for work are confirmed and obtained in accordance with workplace procedures

2 Monitor and operate gas flow control, measuring and regulating devices

• 2.1Gas flow device and equipment performance information is collected and reported in accordance with workplace and job requirements
• 2.2Workplace safety and environmental risk control measures, schedule of work and workplace procedures for carrying out work are followed
• 2.3Appropriate materials, tools and equipment are selected and used safely in accordance with manufacturer instructions and workplace procedures
• 2.4Dealings with customers are consistent with workplace procedures and the specific needs of customers are identified and considered in targeting client service
• 2.5Work is completed within agreed timeframe and to industry standards in accordance with job requirements and workplace procedures
• 2.6Routine inspections of system are scheduled and monitored in accordance with the work schedule and workplace procedures
• 2.7Alarms, codes and hazard warnings are correctly recognised, and the correct response strategy is selected and applied in accordance with workplace procedures
• 2.8Unplanned events and non-routine problems are identified and actioned in accordance with workplace procedures
• 2.9Unplanned events are referred to the relevant person/s for directions in accordance with workplace procedures

3 Control and adjust flows and complete records and reports

• 3.1Workplace safety risk control measures for work completion are followed
• 3.2Quality and safety checks of the work are conducted in accordance with job requirements, workplace procedures and community and industry standards
• 3.3Worksite is cleaned, reinstated and made safe in accordance with workplace procedures
• 3.4Tools, equipment and any surplus resources/materials are cleaned, checked and securely stored in accordance with workplace procedures
• 3.5Incidents are reported and followed up as required in accordance with workplace procedures
• 3.6Gas flows and diversions are determined to facilitate repair or emergency activities in accordance with organisational job requirements
• 3.7Relevant person/s is notified of work completion in accordance with workplace procedures
• 3.8Work completion documentation is completed accurately and provided to relevant person/s in accordance with workplace procedures

What does an assessment tool for UEGNSG025 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for UEGNSG025 needs to address all 42 unit components: 3 elements with 24 performance criteria, 4 performance evidence requirements, 14 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for UEGNSG025?

Auditori pulls the current release of UEGNSG025 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for UEGNSG025 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing UEGNSG025 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of UEGNSG025, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.