UEEHA0035 — Supervise repair and overhaul of explosion-protected rotating machines

Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.

Generate UEEHA0035 free See a real sample

Every new account includes a free credit — no card, no subscription.

What an assessment for UEEHA0035 must cover

61 assessable components: 5 elements (21 performance criteria), 13 performance evidence and 27 knowledge evidence requirements. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.

Elements & performance criteria

1 Prepare for repair and overhaul of equipment

1.1Repair facility quality assurance system is obtained, interpreted and applied
1.2Instructions on repair and/or overhaul are received and expected outcomes of the work confirmed with the user
1.3All documentation relevant to the equipment repair and/or overhaul is obtained, interpreted and applied
1.4Where adequate relevant equipment information is not available, steps taken to source such information are documented
1.5Agreement is made with the user for the repair and/or overhaul of Group II and III equipment to be completed in accordance with standards where adequate documentation is not available
1.6The common requirements for equipment repair and overhaul are ascertained from relevant standards and regulations and applied to the preparation for the work only where this arrangement is permitted

2 Establish the level of repair/overhaul required

2.1Safe work methods are applied to measurements, and tests and inspections carried out on the equipment to establish the extent of repair and/or overhaul
2.2The requirements, evaluation procedures and parameters of the type of equipment to be repaired and/or overhauled are ascertained from relevant standards and regulations and applied to establishing the extent of the work
2.3Measurement devices and instruments are maintained and calibrated in accordance with recognised practices
2.4The extent of work to be completed is established from measurements, tolerances and evaluation procedures and their correspondence with equipment documentation and the requirements of standards
2.5Specifications and instructions for the repair and/or overhaul work are documented ensuring compliance with original documentation, standards and user instructions

3 Arrange repair and overhaul work

3.1Arrangements are made for the repair and overhaul work to be completed in accordance with the specification and instructions, by an operative with the competencies specified in standards
3.2A copy of repair and/or overhaul specifications and instructions is provided to the operative responsible for completing the work

4 Verify that equipment complies with original certification

4.1Scope and level of testing and measurements required to verify that overhauled and/or repaired equipment complies with original certification is determined in accordance with manufacturers’ documentation and standards requirements as applicable to an equipment group
4.2Verification tests and measurements are arranged, conducted and documented in accordance with equipment type, standards and instruction manuals
4.3Results of verification tests and measurements are reviewed to ascertain whether they comply with original equipment documentation and/or agreement with the user
4.4Actions are taken to rectify any non-compliance identified through the verification tests and measurements

5 Document repair and overhaul work

5.1Equipment is marked to show it has been repaired and/or overhauled in accordance with standards and equipment group
5.2Job report of the completed repair and/or overhaul is prepared in accordance with standards and submitted to the user for inclusion in their verification dossier
5.3Repair facility records are updated to include the job record in accordance with standards and quality system
5.4The steps taken to obtain the certificate documents where adequate equipment documentation was not available are included in the repair facility records

Performance evidence

preparing for repair and overhaul work of equipment, including: following quality assurance system procedures
preparing for repair and overhaul work of equipment, including: gathering required documentation
establishing the level of repair and overhaul required, including: following safe work methods
establishing the level of repair and overhaul required, including: examining equipment submitted for repair and overhaul using appropriately maintained measuring devices and instruments
establishing the level of repair and overhaul required, including: documenting the specification for the repair and overhaul
arranging repair and overhaul work, including: selecting appropriately competent operatives to carry out repair and/or overhaul, including reclamation activities
arranging repair and overhaul work, including: providing operative with the repair and/or overhaul specifications
verifying that equipment complies with original certification, including: choosing the scope and level of tests and measurements required to verify whether the repaired and/or overhauled equipment complies with original documented requirements
verifying that equipment complies with original certification, including: arranging for verification of compliance tests and measurements to be carried out
verifying that equipment complies with original certification, including: reviewing results of verification tests and taking actions to rectify any non-compliance identified by the verification tests and measurements
documenting repair and overhaul work, including: marking equipment in accordance with standard requirements to show that equipment has been repaired
documenting repair and overhaul work, including: preparing job report of the completed repair and overhaul, including all items specified by standards and submitted to the user
documenting repair and overhaul work, including: updating the repair and overhaul undertaken in the repair facility records, including steps taken to obtain equipment documentation as required by standards

Knowledge evidence

repair and overhaul of explosion-protected equipment (common requirements): common requirements for repair and overhaul work of explosive-protected equipment including: equipment with documentation and without documentation
repair and overhaul of explosion-protected equipment (common requirements): common requirements for repair and overhaul work of explosive-protected equipment including: statutory requirements for repair facility and user
repair and overhaul of explosion-protected equipment (common requirements): common requirements for repair and overhaul work of explosive-protected equipment including: instructions for the user
repair and overhaul of explosion-protected equipment (common requirements): common requirements for repair and overhaul work of explosive-protected equipment including: instructions for the repair facility
repair and overhaul of explosion-protected equipment (common requirements): common requirements for repair and overhaul work of explosive-protected equipment including: identification of repaired equipment by marking including: marking information
repair and overhaul of explosion-protected equipment (common requirements): common requirements for repair and overhaul work of explosive-protected equipment including: identification of repaired equipment by marking including: symbols in accordance with standards requirements
repair and overhaul of explosion-protected equipment (common requirements): common requirements for repair and overhaul work of explosive-protected equipment including: identification of repaired equipment by marking including: other situations
repair and overhaul of explosion-protected equipment (common requirements): requirements for the repair and overhaul of equipment with protection level (EPL) Ga
repair and overhaul of explosion-protected equipment (common requirements): limitations and requirements for the repair and overhaul of equipment with explosive-protection type special Ex ‘s’
explosion-protected rotating machines: requirements for the repair and overhaul of explosive-protection type flameproof Ex ‘d’ for rotating machines including: instructions for the repair facility - rotating machines
explosion-protected rotating machines: requirements for the repair and overhaul of explosive-protection type flameproof Ex ‘d’ for rotating machines including: winding data and repair parameters
explosion-protected rotating machines: requirements for the repair and overhaul of explosive-protection type flameproof Ex ‘d’ for rotating machines including: embedded winding temperature sensors
explosion-protected rotating machines: requirements for the repair and overhaul of explosive-protection type flameproof Ex ‘d’ for rotating machines including: machine frames/enclosures and flameproof joints
explosion-protected rotating machines: requirements for the repair and overhaul of explosive-protection type flameproof Ex ‘d’ for rotating machines including: repair of rotors
explosion-protected rotating machines: requirements for the repair and overhaul of explosive-protection type flameproof Ex ‘d’ for rotating machines including: winding tests conducted after repair
explosion-protected rotating machines: requirements for the repair and overhaul of explosive-protection type flameproof Ex ‘d’ for rotating machines including: machine tests after repair/overhaul
explosion-protected rotating machines: requirements for the repair and overhaul of explosive-protection type flameproof Ex ‘d’ for rotating machines including: auxiliary equipment
explosion-protected rotating machines: requirements for the repair and overhaul of explosive-protection type flameproof Ex ‘d’ for rotating machines including: documentation of repair/overhaul
explosion-protected rotating machines: requirements for the repair and overhaul of explosive-protection type increased safety Ex ‘e’ for rotating machines including: instructions for the repair facility - rotating machines
explosion-protected rotating machines: requirements for the repair and overhaul of explosive-protection type increased safety Ex ‘e’ for rotating machines including: winding data and repair parameters
explosion-protected rotating machines: requirements for the repair and overhaul of explosive-protection type increased safety Ex ‘e’ for rotating machines including: embedded winding temperature sensors
explosion-protected rotating machines: requirements for the repair and overhaul of explosive-protection type increased safety Ex ‘e’ for rotating machines including: machine frames/enclosures, clearances and terminations
explosion-protected rotating machines: requirements for the repair and overhaul of explosive-protection type increased safety Ex ‘e’ for rotating machines including: repair of rotors
explosion-protected rotating machines: requirements for the repair and overhaul of explosive-protection type increased safety Ex ‘e’ for rotating machines including: winding tests conducted after repair
explosion-protected rotating machines: requirements for the repair and overhaul of explosive-protection type increased safety Ex ‘e’ for rotating machines including: machine tests after repair/overhaul
explosion-protected rotating machines: requirements for the repair and overhaul of explosive-protection type increased safety Ex ‘e’ for rotating machines including: documentation of repair/overhaul
explosion-protected rotating machines: evaluation procedures and parameters including overhaul of equipment protected by enclosures Ex ‘t’ (dip) motors

Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.

See what you get before you start

Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:

Questions about assessing UEEHA0035

What does an assessment tool for UEEHA0035 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for UEEHA0035 needs to address all 61 unit components: 5 elements with 21 performance criteria, 13 performance evidence requirements, 27 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for UEEHA0035?

Auditori pulls the current release of UEEHA0035 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for UEEHA0035 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing UEEHA0035 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of UEEHA0035, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.

Related units

Your UEEHA0035 assessment tool, in minutes.

First unit free. No card, no RTO registration, no subscription.

Generate UEEHA0035 free