TLIW0003 — Grind rail on tram/light rail systems

Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.

Generate TLIW0003 free See a real sample

Every new account includes a free credit — no card, no subscription.

What an assessment for TLIW0003 must cover

38 assessable components: 5 elements (20 performance criteria), 10 performance evidence and 8 knowledge evidence requirements. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.

Elements & performance criteria

1 Determine job requirements

1.1New welds and weld repairs are located
1.2Corrugations on the rail are identified
1.3Hazards are identified, risks are assessed and control measures are implemented
1.4Appropriate equipment is selected
1.5Appropriate repair method and/or profile is selected to ensure completed work will meet specifications
1.6Site is cleared of obstructions and combustible material
1.7Traffic management plan is implemented, where required, in accordance with workplace procedures

2 Grind weld repair

2.1Rail and check rail are ground to profile using approved equipment in accordance with workplace procedures
2.2Grinding equipment is operated safely in accordance with work health and safety (WHS)/occupational health and safety (OHS) and environmental requirements
2.3Rail profile and vertical and horizontal alignment are measured to ensure compliance with tram/light rail network or acceptance standards
2.4Rail surface condition is assessed for compliance with tram/light rail network standards

3 Grind rail to repair corrugations

3.1Rail is ground using approved equipment in accordance with workplace procedures
3.2Grinding equipment is operated safely in accordance with WHS/OHS and environmental requirements
3.3Finished surface is checked to ensure compliance with specifications

4 Re-profile rail

4.1Rail is re-profiled using approved equipment in accordance with workplace procedures
4.2Equipment is operated safely in accordance with WHS/OHS and environmental requirements
4.3Finished surface is checked to ensure ground profile complies with organisational requirements and specifications

5 Complete documentation

5.1Required documentation procedures and processes are confirmed
5.2Documentation is filled in legibly and proofread
5.3Documentation is processed in accordance with workplace procedures

Performance evidence

applying relevant safeworking system and workplace procedures
grinding rail on tram or light rail system in accordance with workplace specifications and procedures
identifying job hazards and taking required action to minimise, control or eliminate identified hazards
interpreting and following operational instructions and prioritising work
modifying activities depending on operational contingencies, risk situations and environments
operating and adapting to differences in equipment in accordance with operating procedures
reading and interpreting relevant technical data, drawings, instructions and manuals
reporting and/or rectifying identified problems, faults or malfunctions in accordance with workplace procedures
selecting and using hand tools, power tools and equipment
working systematically with required attention to detail without injury to self or others, or damage to goods or equipment

Knowledge evidence

documentation and record keeping requirements
grinding methods and results
hazards that may exist when grinding rail and welds, and ways of controlling the risks involved
problems that may occur when grinding rail and welds, and action that can be taken to report or resolve these problems
relevant work health and safety (WHS)/occupational health and safety (OHS) and environmental procedures and regulations
traffic management plan
tram/light rail network standards for rail profile and surface condition
workplace procedures for grinding rail and welds

Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.

See what you get before you start

Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:

Questions about assessing TLIW0003

What does an assessment tool for TLIW0003 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for TLIW0003 needs to address all 38 unit components: 5 elements with 20 performance criteria, 10 performance evidence requirements, 8 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for TLIW0003?

Auditori pulls the current release of TLIW0003 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for TLIW0003 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing TLIW0003 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of TLIW0003, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.

Related units

Your TLIW0003 assessment tool, in minutes.

First unit free. No card, no RTO registration, no subscription.

Generate TLIW0003 free