TLIC3018 — Operate on-train remote control system

Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.

Generate TLIC3018 free See a real sample

Every new account includes a free credit — no card, no subscription.

What an assessment for TLIC3018 must cover

36 assessable components: 3 elements (10 performance criteria), 12 performance evidence and 14 knowledge evidence requirements. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.

Elements & performance criteria

1 Position equipment and motive power unit/s

1.1Remote control equipment and motive power units are positioned in required locations
1.2Brake test is conducted on each train section with assistance from appropriate personnel
1.3Front and rear train consists are coupled together to form one train in accordance with safe working techniques
1.4Relevant work health and safety (WHS)/occupational health and safety (OHS) requirements are followed to prevent injury and damage
1.5Relevant codes of practice, system of safeworking and work requirements are followed

2 Monitor and operate remote control equipment

2.1Motive power units and control system set-up are checked to ensure safe operational status
2.2Remote control equipment is operated and monitored in accordance with operational requirements during train movements to provide safe train handling and control
2.3Operational difficulties encountered are addressed by re-establishing control of the motive power units with minimum risk to personnel and equipment

3 Shut down remote control equipment

3.1Shutdown procedures of lead and remote control equipment are followed to ensure train security and de-activation of the system
3.2Equipment indicators or functions are operated to ensure shutdown process is correct and complete

Performance evidence

completing relevant documentation
identifying job hazards and taking required actions to minimise, control or eliminate identified hazards
interpreting and following operational instructions and prioritising work
modifying activities depending on operational contingencies, risk situations and environments
monitoring performance of equipment and taking appropriate actions
monitoring train speeds and movements and taking appropriate actions
monitoring work activities in terms of planned schedule
operating and adapting to differences in equipment in accordance with workplace operating procedures
reading and interpreting relevant instructions, procedures, information and signs
reporting and/or rectifying identified problems, faults or malfunctions promptly in accordance with regulatory requirements and workplace procedures
shutting down remote control system in accordance with workplace procedures
working systematically with required attention to detail without injury to self or others, or damage to goods or equipment

Knowledge evidence

applicable state/territory legislated rail safety requirements, relevant codes of practice and/or guidelines
equipment defects and operational difficulties that may occur during the operation of remote control units
motive power operating techniques
on-train remote control unit controls, instruments and indicators, and their purpose, location and use
rail safety, work health and safety (WHS)/occupational health and safety (OHS), and environmental procedures and regulations
system of safeworking
workplace procedures for:
braking and safety system procedures
controlling motive power units
managing hazardous situations involving online remote control systems
operating remote control units
operational instructions for on-train remote control system
positioning procedures
shutdown workplace procedures

Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.

See what you get before you start

Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:

Questions about assessing TLIC3018

What does an assessment tool for TLIC3018 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for TLIC3018 needs to address all 36 unit components: 3 elements with 10 performance criteria, 12 performance evidence requirements, 14 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for TLIC3018?

Auditori pulls the current release of TLIC3018 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for TLIC3018 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing TLIC3018 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of TLIC3018, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.

Related units

Your TLIC3018 assessment tool, in minutes.

First unit free. No card, no RTO registration, no subscription.

Generate TLIC3018 free