SITTVAF009 — Tow and site recreational vehicles
Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.
Every new account includes a free credit — no card, no subscription.
What an assessment for SITTVAF009 must cover
46 assessable components: 3 elements (12 performance criteria), 5 performance evidence and 25 knowledge evidence requirements, plus 4 foundation skills. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.
Elements & performance criteria
1 Prepare for towing of recreational vehicle.
- 1.1Identify and confirm required site for recreational vehicle.
- 1.2Calculate gross weight of recreational vehicle and determine its aggregate mass.
- 1.3Check and confirm towing capacity of towing vehicle and adhere to tow-bar capacity.
- 1.4Conduct pre-operational checks on towing and recreational vehicles.
- 1.5Attach recreational vehicle to towing vehicle according to manufacturer instructions.
2 Move and site recreational vehicle.
- 2.1Identify and remove or avoid obstacles or hazards.
- 2.2Give clear directions to others in the area to enable safe vehicle movement without injury to people or damage to vehicles, equipment or facilities.
- 2.3Safely manoeuvre recreational vehicle to required location.
- 2.4Position recreational vehicle ensuring it is level and parallel and within reach of required equipment and position stabilising fixtures.
3 Remove recreational vehicle from site.
- 3.1Disconnect power heads, water pipes and electrical leads.
- 3.2Stow stabilising fixtures.
- 3.3Remove recreational vehicle from site according to safety procedures.
Performance evidence
- manoeuvre, tow and site at least three different types of recreational vehicles as listed in the knowledge evidence using appropriate towing vehicle
- identify and avoid obstacles and hazards during above operations
- communicate safety directions to others in the vicinity of towing and siting above vehicles during above operations
- identify and calculate weight-to-vehicle towing ratios set by state and territory authorities and manufacturers for above operations
- complete above activities within commercial time constraints and deadlines determined by the customer or organisation.
Knowledge evidence
- common types of recreational vehicles:
- camper or tent trailer
- cross-country or an off-road all-terrain caravan
- expanda or slide out
- five-wheeler
- full van
- pop top
- slide-on camper or campervan
- types of vehicles that are used to tow recreational vehicles:
- four wheel drive
- specialised towing truck or unit
- tractor
- truck
- two wheel drive
- van
- pre-operational checks on towing and recreational vehicles:
- brakes
- fluid levels and topping up
- operation of vehicle lights and indicators
- tyre pressures
- visual inspection
- details of the site where recreational vehicles are to be positioned and suitable positions
- weight-to-vehicle towing ratios set by state and territory authorities and manufacturers
- pre-operational checks for the towing vehicle and for the recreational vehicle
- major hazards and obstacles associated with towing and siting recreational vehicles, and ways to address them.
Foundation skills
- Reading skills: interpret weight-to-vehicle towing ratios, manufacturer instructions and operational check information.
- Oral communication skills: discuss where the recreational vehicle will be sited.
- Numeracy skills: calculate weights, aggregate mass of recreational vehicles and capacities of towing vehicles.
- Problem-solving skills: identify and avoid obstacles or hazards.
Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.
See what you get before you start
Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:
Questions about assessing SITTVAF009
What does an assessment tool for SITTVAF009 need to cover?
To satisfy the Principles of Assessment and Rules of Evidence, an assessment for SITTVAF009 needs to address all 46 unit components: 3 elements with 12 performance criteria, 5 performance evidence requirements, 25 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.
How does Auditori generate an assessment tool for SITTVAF009?
Auditori pulls the current release of SITTVAF009 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.
Is the first assessment tool really free?
Yes. Every new account includes one free credit — enough to generate the complete assessment tool for SITTVAF009 — with no card and no subscription required. After that it's pay-as-you-go per unit.
Can I check my existing SITTVAF009 assessment instead of generating a new one?
Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of SITTVAF009, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.
Related units
Your SITTVAF009 assessment tool, in minutes.
First unit free. No card, no RTO registration, no subscription.
Generate SITTVAF009 free