RIINHB318D — Install and operate water and gas control equipment

Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.

Generate RIINHB318D free See a real sample

Every new account includes a free credit — no card, no subscription.

What an assessment for RIINHB318D must cover

40 assessable components: 5 elements (27 performance criteria), 4 performance evidence and 9 knowledge evidence requirements. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.

Elements & performance criteria

1 Plan and prepare for the installation and operation of water and gas control equipment

1.1Access, interpret and apply water and gas control equipment documentation and ensure the work activity is compliant
1.2Obtain, read, interpret, clarify and confirm work requirements
1.3Identify and address potential risks, hazards and environmental issues and implement control measures
1.4Select and wear personal protective equipment appropriate for work activities
1.5Communicate and coordinate activities with others throughout the work activity
1.6Prepare and maintain a job plan, in consultation with relevant team members, which makes best use of the available resources and meets the task requirements
1.7Obtain and interpret emergency procedures, and be prepared for fire/accident/emergency

2 Organise installation

2.1Carry out pre-start and start up, shutdown and secure equipment procedures
2.2Identify, select and apply rig operational controls
2.3Select the appropriate water and gas control equipment to meet the requirements of the configuration
2.4Inspect the water and gas control equipment components for serviceability
2.5Arrange the delivery of all equipment required for the installation and operation of the water and gas control equipment to the worksite
2.6Ensure that the drill hole is deep enough to house the down-hole components and adjust depth as necessary
2.7Insert the down-hole components into the standpipe
2.8Separate the rod string, leaving sufficient distance between the rod clamp and standpipe (or other attachments) to install the stuffing box

3 Install water and gas control equipment

3.1Install the control valve, applying appropriate securing method
3.2Install the ‘T’ piece, applying appropriate securing method
3.3Install the stuffing box, applying appropriate securing method
3.4Pack and secure the seal in accordance with requirements and procedures

4 Operate the water and gas control equipment

4.1Monitor the water and gas control equipment and ensure its correct operation
4.2Rectify water and gas control equipment operational problems
4.3Test the isolation of the water and gas control equipment
4.4Apply site environmental controls

5 Complete equipment maintenance and housekeeping

5.1Inspect and fault-find all water and gas control equipment
5.2Remove and replace defective components
5.3Ensure housekeeping activities are completed
5.4Process records

Performance evidence

locates and applies relevant documentation, policies and procedures
implements the requirements, procedures and techniques for the safe, effective and efficient completion of the installation and operating of water and gas control equipment including: - accessing, reading, interpreting and applying the project site geological, hydrological, engineering survey information - accessing, reading, interpreting and applying the project plans, drill plans, drawings and specifications - accessing, reading, interpreting and applying the data and test results - identifying water and gas control equipment components - interpreting the water and gas control equipment configuration requirements
works effectively with others to undertake and complete the installation and operating of water and gas control equipment that meets all of the required outcomes including: - complying with written and verbal reporting requirements and procedures - communicating clearly and concisely with others to receive and clarify work instructions - communicating clearly and concisely with others to resolve coordination requirements prior to commencing and during work activities
demonstrates completion of the installation and operating of water and gas control equipment that safely, effectively and efficiently meets all of the required outcomes on more than one (1) occasion including: - selecting the appropriate water and gas control equipment to meet the requirements of the configuration including; - standpipe, - gate valve, - ‘T’ piece, - stuffing box, which may be either: - NQ gauge - HQ gauge - four inch hose and - gas and water separator - inspecting the water and gas control equipment components for serviceability - ensuring that the drill hole is deep enough to house the down-hole components and adjusting depth as necessary - inserting the down-hole components into the standpipe - installing the control valve, applying appropriate securing method - installing the ‘T’ piece, applying appropriate securing method - install the stuffing box, applying appropriate securing method - monitoring the water and gas control equipment and ensure its correct operation including; - leaks limited to specification - water flowing from the ‘T’ piece - water flowing to the fines tank - valves are serviceable - free movement of drill rods - rectifying water and gas control equipment operational problems including; - adjusting equipment - tightening fasteners, and - replacing non serviceable items - testing the isolation of the water and gas control equipment

Knowledge evidence

work, health and safety
environmental issues
operating drill rig
housekeeping
typical geology types
principles of underground in-seam directional drilling operations
possible variations in water and gas control equipment required in possible situations
relevant regulations and codes
being prepared for fire/accident/emergency

Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.

See what you get before you start

Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:

Questions about assessing RIINHB318D

What does an assessment tool for RIINHB318D need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for RIINHB318D needs to address all 40 unit components: 5 elements with 27 performance criteria, 4 performance evidence requirements, 9 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for RIINHB318D?

Auditori pulls the current release of RIINHB318D from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for RIINHB318D — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing RIINHB318D assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of RIINHB318D, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.

Related units

Your RIINHB318D assessment tool, in minutes.

First unit free. No card, no RTO registration, no subscription.

Generate RIINHB318D free