RIICRC323E — Insert tie bars in fresh concrete

Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.

Generate RIICRC323E free See a real sample

Every new account includes a free credit — no card, no subscription.

What an assessment for RIICRC323E must cover

65 assessable components: 4 elements (23 performance criteria), 24 performance evidence and 16 knowledge evidence requirements, plus 2 foundation skills. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.

Elements & performance criteria

1 Plan and prepare to insert tie bars in fresh concrete

1.1Obtain, interpret, clarify and confirm work requirements
1.2Access, interpret and apply documentation required to insert tie bars in fresh concrete and confirm work activity is compliant
1.3Identify and address potential risks, hazards and environmental issues and implement control measures
1.4Select and wear personal protective equipment according to site requirements
1.5Identify, obtain and implement signage requirements
1.6Select plant, tools and equipment required to carry out tasks and check for faults

2 Set up operations

2.1Verify quantity of bars according to job requirements
2.2Inspect and confirm bars are fit for purpose according to job requirements
2.3Inspect and confirm saw cut locations are marked out or programmed into paving computer according to job and site requirements
2.4Check and confirm automatic program spacing according to job requirements
2.5Check and confirm tie bar spacing and variations according to job requirements
2.6Check for safe operations according to site requirements and confirm operation of emergency stops

3 Operate tie bar system

3.1Maintain safe working area around tie bar inserter according to site requirements
3.2Maintain required stock of bars at tie bar inserter according to job requirements
3.3Operate and monitor tie bar insertion for specified location, alignment and depth according to job and site requirements
3.4Report missed bars and jamming according to site requirements
3.5Check and confirm location of missed and non-compliant insertion is recorded according to site requirements
3.6Check and confirm concrete is compacted around tie bar according to job requirements
3.7Load magazine according to job and site requirements
3.8Monitor movements and hazards and identify and communicate changes to work environment according to site requirements

4 Conduct clean-up activities

4.1Clear work area and dispose of, reuse or recycle materials according to site requirements
4.2Clean, check, maintain and store machinery, tools and equipment according to manufacturer specifications and site requirements
4.3Return unused stock bars to store according to site requirements

Performance evidence

insert tie bars in fresh concrete on at least two occasions, including:
setting up for safe operations
identifying and marking onsite changes in tie bar spacing according to job requirements
inserting and compacting tie bars to specified depth over 75 linear metres on at least three occasions
loading magazines
setting out inserted tie bars and marking out saw cut locations using:
at least one manual method
at least one automated program
clearing work area and disposing of, recycling or storing materials
cleaning, checking, maintaining and storing plant, tools and equipment.
During the above, the candidate must:
locate and apply required documentation, policies and procedures and confirm work activity is compliant
implement the requirements, procedures and techniques to insert tie bars into fresh concrete, including:
identifying and applying required specifications to all work activities
identifying, addressing and reporting potential hazards and risks
identifying, obtaining, confirming and implementing signage and barrier requirements
selecting and checking for faults all plant, tools and equipment required to carry out tasks
inspecting and confirming tie bars are appropriate for work tasks
identifying, addressing and reporting environmental issues
work with others to insert tie bars into fresh concrete in a way that meets required outcomes, including:
preparing for and organising work activities to meet task requirements
communicating with others to receive and clarify work instructions
using communication techniques and aids to advise others of work activity
monitoring movements and hazards and identifying and communicating changes to work environment.

Knowledge evidence

policies, procedures and documentation required to insert tie bars in fresh concrete, including those relating to:
site requirements
manufacturer specifications for required plant and equipment
relevant job specifications
hazard and risk management
environmental protection
work activity set up procedures
communication techniques and aids
site isolation, signage and erecting barriers
work health and safety
waste management
types, characteristics, technical capabilities and limitations of plant and equipment required to insert tie bars in fresh concrete
principles and techniques for effective insert tie bars in fresh concrete, including:
techniques for setting up safe operations
techniques for inserting and compacting tie bars, including manual and automatic operations
magazine loading techniques.

Foundation skills

Numeracy: Calculates basic measurements including masses and dimensions
Self-management: Monitors and minimises own exposure to worksite risks and hazards during work activities

Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.

See what you get before you start

Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:

Questions about assessing RIICRC323E

What does an assessment tool for RIICRC323E need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for RIICRC323E needs to address all 65 unit components: 4 elements with 23 performance criteria, 24 performance evidence requirements, 16 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for RIICRC323E?

Auditori pulls the current release of RIICRC323E from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for RIICRC323E — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing RIICRC323E assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of RIICRC323E, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.

Related units

Your RIICRC323E assessment tool, in minutes.

First unit free. No card, no RTO registration, no subscription.

Generate RIICRC323E free