RIICRC321E — Use automated paving guidance systems

Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.

Generate RIICRC321E free See a real sample

Every new account includes a free credit — no card, no subscription.

What an assessment for RIICRC321E must cover

62 assessable components: 4 elements (20 performance criteria), 20 performance evidence and 20 knowledge evidence requirements, plus 2 foundation skills. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.

Elements & performance criteria

1 Plan and prepare to use automated paving guidance systems

1.1Obtain, interpret, clarify and confirm work requirements
1.2Access, interpret and apply documentation required to use automated paving guidance systems (APGS) and confirm work activity is compliant
1.3Identify and address potential risks, hazards and environmental issues and implement control measures
1.4Select and wear personal protective equipment according to site requirements
1.5Select plant, tools and equipment required to carry out tasks and check for faults

2 Set up APGS

2.1Set up prisms according to manufacturer specifications and job and site requirements
2.2Locate survey equipment according to manufacturer specifications and job and site requirements
2.3Identify and establish control points and theodolite positions according to job and site requirements
2.4Verify survey model against job and site requirements
2.5Calibrate paver to tolerances according to manufacturer specifications and site requirements

3 Operate APGS

3.1Set APGS controls to automatic control settings
3.2Check signal inputs and automated control according to manufacturer specifications and site requirements
3.3Check conformity of newly paved concrete against worksite model
3.4Conduct paver and APGS adjustments according to job and site requirements
3.5Reposition total station according to job and site requirements
3.6Monitor movements and hazards and identify and communicate changes to work environment according to site requirements

4 Conduct shutdown operations

4.1Check and confirm supervisor instructions
4.2Shutdown APGS according to manufacturer specifications and site requirements
4.3Lower sensors on paver according to manufacturer specifications and site requirements
4.4Clean, check, maintain and store total stations according to manufacturer specifications and site requirements

Performance evidence

use automated paving guidance systems (APGS) on at least two occasions, including:
setting up and calibrating APGS operations and paving at least 200 meters according to job requirements
adjusting pavers at least six times, including at least:
two times horizontally, including one positive and one negative
two times vertically, including one positive and one and negative
two times combining the above adjustments
conducting shutdown operations
cleaning, checking, maintaining and storing total stations.
During the above, the candidate must:
locate and apply required documentation, policies and procedures and confirm work activity is compliant
implement the requirements, procedures and techniques to use APGS, including:
identifying and applying required specifications to all work activities
identifying, addressing and reporting potential hazards and risks
selecting all plant, tools and equipment required to carry out tasks and checking for faults
identifying, addressing and reporting environmental issues
work with others to use APGS in a way that meets required outcomes, including:
preparing for and organising work activities to meet task requirements
communicating with others to receive and clarify work instructions
using communication techniques and aids to advise others of work activity and exclusion zones
monitoring movements and hazards and identifying and communicating changes to work environment.

Knowledge evidence

policies, procedures and documentation required to use APGS, including those relating to:
site requirements
manufacturer specifications for required plant and equipment
relevant job specifications
hazard and risk management
environmental protection
work activity set up procedures
communication techniques and aids
work health and safety
types, characteristics, technical capabilities and limitations of APGS and equipment required to use APGS, including:
global positioning system (GPS)
automated laser detection systems
positioning systems
survey equipment, including:
theodolite
automated laser devices
stringlines and markers
principles and techniques for effective use of APGS, including:
techniques for set up, calibration, operation and shutdown
vertical, horizon and combined adjustment techniques.

Foundation skills

Numeracy: Calculates basic measurements including masses and dimensions
Self-management: Monitors and minimises own exposure to worksite risks and hazards during work activities

Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.

See what you get before you start

Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:

Questions about assessing RIICRC321E

What does an assessment tool for RIICRC321E need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for RIICRC321E needs to address all 62 unit components: 4 elements with 20 performance criteria, 20 performance evidence requirements, 20 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for RIICRC321E?

Auditori pulls the current release of RIICRC321E from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for RIICRC321E — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing RIICRC321E assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of RIICRC321E, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.

Related units

Your RIICRC321E assessment tool, in minutes.

First unit free. No card, no RTO registration, no subscription.

Generate RIICRC321E free