RIICRC320E — Seal concrete pavements

Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.

Generate RIICRC320E free See a real sample

Every new account includes a free credit — no card, no subscription.

What an assessment for RIICRC320E must cover

72 assessable components: 4 elements (21 performance criteria), 19 performance evidence and 29 knowledge evidence requirements, plus 3 foundation skills. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.

Elements & performance criteria

1 Plan and prepare to seal concrete pavements

1.1Obtain, interpret, clarify and confirm work requirements
1.2Access, interpret and apply documentation required to seal concrete pavements and confirm work activity is compliant
1.3Identify and address potential risks, hazards and environmental issues and implement control measures
1.4Select and wear personal protective equipment according to site requirements
1.5Identify, obtain, confirm and implement signage requirements
1.6Select tools and equipment required to carry out tasks and check for faults

2 Seal concrete pavements using hand tools

2.1Clamp or fix materials in position according to job requirement
2.2Use hand tools according to manufacturer specifications and job and site requirements
2.3Store hand tools according to manufacturer specifications and site requirements when not in use
2.4Monitor movements and hazards, identify and communicate changes to work environment according to site requirements

3 Seal concrete pavements using power tools

3.1Check power leads and hoses according to manufacturer specifications and site requirements
3.2Clear route for placement of leads and hoses according job and site requirements
3.3Run electrical power leads to power supply according to site requirements
3.4Connect electric power leads to power board or direct to power tool according to job and site requirements
3.5Run air hoses to compressed air supply and cover potential trip hazards according to site requirements
3.6Connect hose to power tool and air supply according to manufacturer specifications and site requirements
3.7Use power tools according to manufacturer specifications and job and site requirements and store as required when not in use
3.8Clean out and prepare for joint sealing according site requirements
3.9Complete joint sealing records according to site requirements

4 Conduct clean-up activities

4.1Clear work area and dispose of, reuse or recycle materials according to site requirements
4.2Clean, check, maintain and store machinery, tools and equipment according to manufacturer specifications and site requirements

Performance evidence

seal concrete pavements on at least two occasions, including:
selecting and using hand tools according to job requirements
selecting and using power tools according to job requirements
sealing concrete pavements using sealer material and backer rods
clearing work area and disposing of, reusing, recycling or storing materials
cleaning, checking, maintaining and storing plant, tools and equipment
During the above, the candidate must:
locate and apply required documentation, policies and procedures and confirm work activity is compliant
implement the requirements, procedures and techniques to seal concrete pavements, including:
identifying and applying required specifications to all work activities
identifying, addressing and reporting potential hazards and risks
identifying, obtaining, confirming and implementing signage and barrier requirements
selecting and checking for faults all plant, tools and equipment required to carry out tasks
identifying, addressing and reporting environmental issues
work with others to seal concrete pavements in way that meets required outcomes, including:
preparing for and organising work activities to meet task requirements
communicating with others to receive and clarify work instructions
using communication techniques and aids to advise others of work activity and exclusion zones
monitoring movements and hazards and identifying and communicating changes to work environment

Knowledge evidence

policies, procedures and documentation required to seal concrete pavements, including those relating to:
site requirements
manufacturer specifications for required plant and equipment
relevant job specifications
hazard and risk management
environmental protection
work activity set up procedures
communication techniques and aids
site isolation, signage and erecting barriers
work health and safety
waste management
workplace recording and reporting
types, characteristics, technical capabilities and limitations of equipment required to seal concrete pavements, including:
hand tools, including:
blowout pipes
spline rollers
brooms
measuring tapes
rulers and depth gauges
power tools, including the following power types:
electric
pneumatic
battery
hydraulics
principles and techniques for effective concrete pavement sealing, including:
techniques for selecting and using hand and power tools
concrete pavement sealing techniques, including use of:
sealer materials
backer rods

Foundation skills

Numeracy: Calculates basic measurements including masses and dimensions
Self-management: Monitors and minimises own exposure to worksite risks and hazards during work activities
Writing: Completes documentation using sector specific vocabulary, grammatical structures and conventions

Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.

See what you get before you start

Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:

Questions about assessing RIICRC320E

What does an assessment tool for RIICRC320E need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for RIICRC320E needs to address all 72 unit components: 4 elements with 21 performance criteria, 19 performance evidence requirements, 29 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for RIICRC320E?

Auditori pulls the current release of RIICRC320E from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for RIICRC320E — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing RIICRC320E assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of RIICRC320E, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.

Related units

Your RIICRC320E assessment tool, in minutes.

First unit free. No card, no RTO registration, no subscription.

Generate RIICRC320E free