RIICRC312E — Set up and maintain concrete paver stringlines
Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.
Every new account includes a free credit — no card, no subscription.
What an assessment for RIICRC312E must cover
67 assessable components: 5 elements (25 performance criteria), 23 performance evidence and 17 knowledge evidence requirements, plus 2 foundation skills. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.
Elements & performance criteria
1 Plan and prepare to set up and maintain concrete paver stringlines
- 1.1Obtain, interpret, clarify and confirm work requirements
- 1.2Access, interpret and apply documentation required to set up and maintain concrete paver stringlines and confirm work activity is compliant
- 1.3Identify and address potential risks, hazards and environmental issues, and implement control measures
- 1.4Select and wear personal protective equipment according to site requirements
- 1.5Identify, obtain and implement signage requirements
- 1.6Select plant, tools and equipment required to carry out tasks and check for faults
2 Inspect equipment and layout
- 2.1Inspect stringlines and confirm compliance against site requirements
- 2.2Inspect stringline flags and pins and confirm compliance against site requirements
- 2.3Inspect hand or car winch and other required pulling devices and confirm operations meet site requirements
- 2.4Inspect ground conditions and confirm compliance against site requirements
- 2.5Load and unload stringline pins onto vehicle according to site requirements
- 2.6Set up barricades and exclusion zones around work area according to job and site requirements
3 Place stringline and pins
- 3.1Drive in stringline pins and place pins according to job and site requirements
- 3.2Check and confirm specified tension of stringlines according to site requirements
- 3.3Establish specified tensions on stringlines according to job requirements using tension measuring devices
- 3.4Set up anchor pins according to job and site requirements
- 3.5Tie off stringline to anchor pins
- 3.6Release stringline from anchor pins
- 3.7Set out from survey pins heights and level and check and confirm alignment according to job requirements
- 3.8Reset broken stringlines as specified according to job requirements
4 Install and remove access gates
- 4.1Release stringline from flags and fix on ground
- 4.2Install and remove protective devices for crossing vehicles as required
- 4.3Check and confirm stringline vertical and horizontal upon resetting
5 Store and maintain pins and stringline
- 5.1Check and maintain clamps, nuts and drive pins according to manufacturer specifications and site requirements
- 5.2Clean, check, maintain and store stringline according to manufacturer specifications and site requirements
Performance evidence
- set up and maintain concrete paver stringlines on at least two occasions, including: installing two access points
- set up and maintain concrete paver stringlines on at least two occasions, including: installing pins to specified height and horizontal adjustment for a minimum distance of 500 metres
- set up and maintain concrete paver stringlines on at least two occasions, including: installing step-up flags
- set up and maintain concrete paver stringlines on at least two occasions, including: tensioning string lines to specifications
- set up and maintain concrete paver stringlines on at least two occasions, including: conducting measurement checks
- set up and maintain concrete paver stringlines on at least two occasions, including: conducting visual inspections and checks
- set up and maintain concrete paver stringlines on at least two occasions, including: placing at least one crossover
- set up and maintain concrete paver stringlines on at least two occasions, including: removing and storing a string line
- set up and maintain concrete paver stringlines on at least two occasions, including: inspecting equipment and layout for compliance with workplace specifications
- set up and maintain concrete paver stringlines on at least two occasions, including: setting up barricades and exclusion zones
- set up and maintain concrete paver stringlines on at least two occasions, including: placing stringline and pins according to job requirements
- set up and maintain concrete paver stringlines on at least two occasions, including: installing and removing access gates and carrying out inspections
- set up and maintain concrete paver stringlines on at least two occasions, including: storing and maintaining pins and stringline according to job requirements.
- locate and apply required documentation, policies and procedures and confirm work activity is compliant
- implement the requirements, procedures and techniques to set up and maintain concrete paver stringlines, including: identifying and applying required specifications to all work activities
- implement the requirements, procedures and techniques to set up and maintain concrete paver stringlines, including: identifying, addressing and reporting potential hazards and risks
- implement the requirements, procedures and techniques to set up and maintain concrete paver stringlines, including: identifying, obtaining, confirming and implementing signage requirements
- implement the requirements, procedures and techniques to set up and maintain concrete paver stringlines, including: selecting and checking for faults all plant, tools and equipment required to carry out tasks
- implement the requirements, procedures and techniques to set up and maintain concrete paver stringlines, including: identifying, addressing and reporting environmental issues and ground conditions
- work with others to setup and maintain concrete paver stringlines in a way that meets required outcomes, including: preparing for and organising work activities to meet task requirements
- work with others to setup and maintain concrete paver stringlines in a way that meets required outcomes, including: communicating with others to receive and clarify work instructions
- work with others to setup and maintain concrete paver stringlines in a way that meets required outcomes, including: using communication techniques and aids to advise others of work activity and exclusion zones, including workplace hand and radio procedures
- work with others to setup and maintain concrete paver stringlines in a way that meets required outcomes, including: monitoring movements and hazards and identifying and communicating changes to work environment.
Knowledge evidence
- legislation required to set up and maintain concrete paver stringlines
- policies, procedures and documentation required to set up and maintain concrete paver stringlines, including those relating to: site requirements
- policies, procedures and documentation required to set up and maintain concrete paver stringlines, including those relating to: manufacturer specifications for required plant and equipment
- policies, procedures and documentation required to set up and maintain concrete paver stringlines, including those relating to: relevant job specifications
- policies, procedures and documentation required to set up and maintain concrete paver stringlines, including those relating to: hazard and risk management
- policies, procedures and documentation required to set up and maintain concrete paver stringlines, including those relating to: environmental protection
- policies, procedures and documentation required to set up and maintain concrete paver stringlines, including those relating to: work activity set up procedures
- policies, procedures and documentation required to set up and maintain concrete paver stringlines, including those relating to: communication techniques and aids
- policies, procedures and documentation required to set up and maintain concrete paver stringlines, including those relating to: site isolation, signage, erecting barriers and traffic control
- policies, procedures and documentation required to set up and maintain concrete paver stringlines, including those relating to: work health and safety
- types, characteristics, technical capabilities and limitations of equipment required to set up and maintain concrete paver stringlines
- principles and techniques for effective set up and maintenance of concrete paver stringlines, including: techniques for inspecting, installing and removing equipment, including: stringlines
- principles and techniques for effective set up and maintenance of concrete paver stringlines, including: techniques for inspecting, installing and removing equipment, including: access points
- principles and techniques for effective set up and maintenance of concrete paver stringlines, including: techniques for inspecting, installing and removing equipment, including: pins
- principles and techniques for effective set up and maintenance of concrete paver stringlines, including: techniques for inspecting, installing and removing equipment, including: step-up flags
- principles and techniques for effective set up and maintenance of concrete paver stringlines, including: techniques for inspecting, installing and removing equipment, including: access gates
- principles and techniques for effective set up and maintenance of concrete paver stringlines, including: ground conditions inspection techniques.
Foundation skills
- Numeracy: Calculates basic measurements including ratios and dimensions
- Self-management: Monitors and minimises own exposure to worksite risks and hazards during work activities
Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.
See what you get before you start
Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:
Questions about assessing RIICRC312E
What does an assessment tool for RIICRC312E need to cover?
To satisfy the Principles of Assessment and Rules of Evidence, an assessment for RIICRC312E needs to address all 67 unit components: 5 elements with 25 performance criteria, 23 performance evidence requirements, 17 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.
How does Auditori generate an assessment tool for RIICRC312E?
Auditori pulls the current release of RIICRC312E from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.
Is the first assessment tool really free?
Yes. Every new account includes one free credit — enough to generate the complete assessment tool for RIICRC312E — with no card and no subscription required. After that it's pay-as-you-go per unit.
Can I check my existing RIICRC312E assessment instead of generating a new one?
Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of RIICRC312E, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.
Related units
- RIICRC201E — Repair potholes
- RIICRC202E — Install signs
- RIICRC203E — Install sub-soil drainage
- RIICRC204E — Install and maintain roadside fixtures
- RIICRC205E — Install utility poles
- RIICRC206E — Install pre-cast concrete crash barriers
- RIICRC207E — Install noise barriers
- RIICRC208E — Lay pipes
- RIICRC209E — Lay reinforced concrete box culverts
- RIICRC301E — Maintain drainage systems
- RIICRC302E — Place and form concrete kerb, channel and fixtures
- RIICRC303E — Lay pavers
Your RIICRC312E assessment tool, in minutes.
First unit free. No card, no RTO registration, no subscription.
Generate RIICRC312E free