RIICRC311E — Conduct concrete road paver operations
Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.
Every new account includes a free credit — no card, no subscription.
What an assessment for RIICRC311E must cover
84 assessable components: 4 elements (18 performance criteria), 35 performance evidence and 28 knowledge evidence requirements, plus 3 foundation skills. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.
Elements & performance criteria
1. Plan and prepare to conduct concrete road paver operations
- 1.1Obtain, interpret, clarify and confirm work requirements
- 1.2Access, interpret and apply documentation required to conduct concrete road paver operations and confirm work activity is compliant
- 1.3Identify and address potential risks, hazards and environmental issues, and implement control measures
- 1.4Select and wear personal protective equipment according to site requirements
- 1.5Identify, obtain, confirm and implement signage requirements
- 1.6Select plant, tools and equipment required to carry out tasks and check for faults
- 1.7Identify specified pavement type according to job requirements
2. Set up concrete road paver
- 2.1Set up paver width and settings according to job requirements
- 2.2Establish work area according to paving drawings and survey markings
- 2.3Conduct pre-start and maintenance checks according to manufacturer specifications and site requirements
3. Operate concrete road paver
- 3.1Adjust sensors and controls as required while paving according to job requirements
- 3.2Use communication systems and hand signals according to site requirements
- 3.3Operate paver according to manufacturer specifications and job and site requirements
- 3.4Complete shut-down and park-up procedures according to manufacturer specifications and site requirements
- 3.5Complete required documentation according to site requirements and report issues to appropriate personnel
4. Conduct clean-up activities
- 4.1Conduct wash down procedures according to manufacturer specifications and site requirements
- 4.2Clean-up work area and dispose of or recycle materials according to site requirements
- 4.3Clean, check, maintain and store plant and tools according to manufacturer specifications and site requirements
Performance evidence
- conduct concrete road paver operations on at least two occasions, including:
- completing the following tasks according to job requirements:
- three longitudinal joints of at least 100 metres to be constructed to required thickness, uniformity, line and level, on both matching and unsupported edges
- five occasions of straight paving, including one of at least 100 metres, to required thickness, uniformity, line and level, on both matching and unsupported edges
- one intersection to required thickness, uniformity, line and level, on both matching and unsupported edges
- conducting these operations using at least two different material types or surface types across the two or more occasions, including:
- no-fines concrete
- kerb and gutter
- base
- sub-base
- type F barrier
- shoulder
- continuous reinforced concrete pavement
- completing formations within specified lateral tilt values
- mixing and spreading granular materials
- spreading concrete materials
- mixing and spreading stabilised materials
- setting up concrete road paver
- operating concrete road paver and making adjustments to sensors and controls while paving
- using communication systems and hand signals according to site requirements
- clearing work area and disposing of, recycling or storing materials
- cleaning, checking, maintaining and storing plant, tools and equipment.
- During the above, the candidate must:
- locate and apply required documentation, policies and procedures and confirm work activity is compliant
- implements the of requirements, procedures and techniques to conduct concrete road paver operations, including:
- identifying and applying required specifications to all work activities
- identifying, addressing and reporting potential hazards and risks
- identifying, obtaining, confirming and implementing signage requirements
- selecting and checking for faults all plant, tools and equipment required to carry out tasks
- identifying, addressing and reporting environmental issues
- work with others to conduct concrete road paver operations in a way that meets required outcomes, including:
- preparing for and organising work activities to meet task requirements
- communicating with others to receive and clarify work instructions
- using communication techniques and aids to advise others of work activity and exclusion zones
- monitoring movements and hazards and identifying and communicating changes to work environment.
Knowledge evidence
- legislation required to conduct concrete road paver operations
- policies, procedures and documentation required to conduct concrete road paver operations, including those relating to:
- site requirements
- manufacturer specifications for required plant and equipment
- relevant job specifications
- hazard and risk management
- environmental protection
- work activity set up procedures
- communication techniques and aids
- site isolation, signage, erecting barriers and traffic control
- work health and safety
- waste management
- types, characteristics, technical capabilities and limitations of concrete road pavers and plant and equipment required to conduct concrete road paver operations
- types, characteristics, technical capabilities and limitations of pavements, including:
- no-fines concrete
- kerb and gutter
- base
- sub-base
- type F barrier
- shoulder
- continuous reinforced concrete pavement
- principles and techniques for effective concrete road paver operations, including:
- techniques for completing formations within specified lateral tilt values
- techniques for mixing and spreading materials, including:
- concrete materials
- stabilised materials
- granular materials
- setting up and operating concrete road pavers.
Foundation skills
- Numeracy: Calculates basic measurements including mass and dimensions
- Self-management: Monitors and minimises own exposure to worksite risks and hazards during work activities
- Writing: Completes documentation using sector specific vocabulary, grammatical structures and conventions
Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.
See what you get before you start
Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:
Questions about assessing RIICRC311E
What does an assessment tool for RIICRC311E need to cover?
To satisfy the Principles of Assessment and Rules of Evidence, an assessment for RIICRC311E needs to address all 84 unit components: 4 elements with 18 performance criteria, 35 performance evidence requirements, 28 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.
How does Auditori generate an assessment tool for RIICRC311E?
Auditori pulls the current release of RIICRC311E from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.
Is the first assessment tool really free?
Yes. Every new account includes one free credit — enough to generate the complete assessment tool for RIICRC311E — with no card and no subscription required. After that it's pay-as-you-go per unit.
Can I check my existing RIICRC311E assessment instead of generating a new one?
Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of RIICRC311E, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.
Related units
- RIICRC201E — Repair potholes
- RIICRC202E — Install signs
- RIICRC203E — Install sub-soil drainage
- RIICRC204E — Install and maintain roadside fixtures
- RIICRC205E — Install utility poles
- RIICRC206E — Install pre-cast concrete crash barriers
- RIICRC207E — Install noise barriers
- RIICRC208E — Lay pipes
- RIICRC209E — Lay reinforced concrete box culverts
- RIICRC301E — Maintain drainage systems
- RIICRC302E — Place and form concrete kerb, channel and fixtures
- RIICRC303E — Lay pavers
Your RIICRC311E assessment tool, in minutes.
First unit free. No card, no RTO registration, no subscription.
Generate RIICRC311E free