Auditori
Get started

MEM48018 — Monitor primary steel making process

Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.

Generate MEM48018 freeSee a real sample

Every new account includes a free credit — no card, no subscription.

What an assessment for MEM48018 must cover

32 assessable components: 3 elements (11 performance criteria), 5 performance evidence and 16 knowledge evidence requirements. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.

Elements & performance criteria

1 Determine job requirements

  • 1.1Follow standard operating procedures (SOPs)
  • 1.2Comply with work health and safety (WHS) requirements at all times
  • 1.3Use appropriate personal protective equipment (PPE) in accordance with SOPs
  • 1.4Identify job requirements from work information

2 Access and use SCADA system

  • 2.1Find all relevant screens and information within SCADA system
  • 2.2Interpret and acknowledge messages
  • 2.3Input and output information according to work requirements

3 Make required changes

  • 3.1Adjust production and/or process in response to SCADA information in accordance with procedures
  • 3.2Apply metallurgical principles to determine and prioritise required actions in accordance with SOPs
  • 3.3Record adjustments and variations to specifications and/or schedules and report to appropriate personnel
  • 3.4Refer all events outside of parameters or SOPs to appropriate personnel for remedial action immediately

Performance evidence

  • following work instructions, standard operating procedures (SOPs) and safe work practices
  • identifying and interpreting specifications, safety procedures and other reference material to monitor primary steel making process
  • adjusting production and/or process in response to Supervisory Control and Data Acquisition (SCADA) information to meet specifications for furnace output on at least two occasions
  • communicating within the workplace
  • maintaining accurate records.

Knowledge evidence

  • safe work practices and procedures and use of personal protective equipment (PPE)
  • plant layout of the basic oxygen steel making (BOS) furnace and identification of the processing units
  • SCADA system
  • process sequence of operations
  • scrap charging, hot metal composition and charging and oxygen lancing
  • slag formation, effect of slag and metal, gas emulsion and effect of stirring with inert gas
  • chemistry and thermodynamics of process including sequence of impurity element removal
  • influence of lance height, slagging practice including single or double number of re-blows and additions of coolant
  • conditions for specification to end points of carbon and temperature including importance of elements C, SI, MN, P, S, residual elements, oxygen content, temperature and type of steel
  • conditions for final specification from end points including control of oxygen content, alloy additions and alloy recoveries, tapping of vessel, slag removal, selection of alloys, argon bubbling and temperature control of ladles
  • ladle transfer
  • metallurgical analysis in steel making
  • importance of composition of steel properties
  • effects of C, SI, MN, P, S and alloys including NI, CR, MO, NB, TI, V, PB
  • effects of residual elements including CU, SN, AL, AS
  • effects of gases in steels including N2, O2, H2.

Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.

See what you get before you start

Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:

Questions about assessing MEM48018

What does an assessment tool for MEM48018 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for MEM48018 needs to address all 32 unit components: 3 elements with 11 performance criteria, 5 performance evidence requirements, 16 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for MEM48018?

Auditori pulls the current release of MEM48018 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for MEM48018 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing MEM48018 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of MEM48018, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.

Related units

Your MEM48018 assessment tool, in minutes.

First unit free. No card, no RTO registration, no subscription.

Generate MEM48018 free