Auditori
Get started

MEM04007 — Pour molten metal

Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.

Generate MEM04007 freeSee a real sample

Every new account includes a free credit — no card, no subscription.

What an assessment for MEM04007 must cover

41 assessable components: 6 elements (22 performance criteria), 9 performance evidence and 10 knowledge evidence requirements. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.

Elements & performance criteria

1 Determine job requirements

  • 1.1Follow standard operating procedures (SOPs)
  • 1.2Comply with work health and safety (WHS) requirements at all times
  • 1.3Use appropriate personal protective equipment (PPE) in accordance with SOPs
  • 1.4Identify job requirements from specifications, job sheets or work instructions

2 Prepare for pouring molten metal

  • 2.1Select equipment as required
  • 2.2Check the condition of the mould and ladle according to procedures
  • 2.3Check the temperature of molten metal for conformance to specification
  • 2.4Sequence pouring method to procedures
  • 2.5Identify the capacity of the required pour against specification
  • 2.6Preheat and prepare the ladle to receive molten metal

3 Transfer ladle to furnace

  • 3.1Check safety clips in accordance with safety procedures
  • 3.2Fill and transfer the ladle to the pouring area
  • 3.3Determine additives from specification and add to molten metal as required

4 Maintain quality of metal as required

  • 4.1Remove slag and/or dross where necessary
  • 4.2Monitor the temperature as required
  • 4.3Undertake chemical analysis and apply remedial action as required

5 Pour molten metal

  • 5.1Inform personnel in the immediate area of the metal pour that pour is to take place
  • 5.2Pour metal safely to specification
  • 5.3Pour metal at an appropriate and continuous rate
  • 5.4Pour a test bar as required

6 Empty excess metal from ladle and return ladle

  • 6.1Pour and tag pigs
  • 6.2Empty, clean and maintain the ladle according to SOPs

Performance evidence

  • following work instructions, standard operating procedures (SOPs) and safe work practices
  • identifying and interpreting specifications, SOPs and standard test data sheets
  • preparing manual pour of molten metal, including selecting equipment as required, and checking condition of mould and appropriate ladle
  • checking temperature of molten metal for conformance against specification, sequencing pouring method and identifying the capacity of the required pour
  • transferring ladle to furnace after preheating/preparing to receive molten metal
  • filling and transferring the ladle to the pouring area in a safe and effective manner and adding additives as required to molten metal
  • maintaining quality of metal by removing slag/dross, monitoring temperature and undertaking chemical analysis and applying any remedial action
  • pouring molten metal safely at an appropriate and continuous rate after informing personnel in immediate area that a pour is to take place to required specifications, pouring a test bar as required
  • emptying excess metal and cleaning and maintaining ladle

Knowledge evidence

  • safe work practices and procedures and use of personal protective equipment (PPE)
  • types and pouring characteristics of metals
  • types and characteristics of ladles
  • procedures for maintaining condition and integrity of ladle
  • procedures for safe handling and transference of molten metal
  • metal treatments, applications and procedures for making additions to molten metal
  • slag and dross removing procedures
  • techniques for sampling and testing molten metal
  • pouring procedures
  • metal identification and tagging procedures

Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.

See what you get before you start

Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:

Questions about assessing MEM04007

What does an assessment tool for MEM04007 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for MEM04007 needs to address all 41 unit components: 6 elements with 22 performance criteria, 9 performance evidence requirements, 10 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for MEM04007?

Auditori pulls the current release of MEM04007 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for MEM04007 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing MEM04007 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of MEM04007, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.

Related units

Your MEM04007 assessment tool, in minutes.

First unit free. No card, no RTO registration, no subscription.

Generate MEM04007 free