MEM27029 — Maintain wheels and tyres

Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.

Generate MEM27029 free See a real sample

Every new account includes a free credit — no card, no subscription.

What an assessment for MEM27029 must cover

39 assessable components: 3 elements (16 performance criteria), 10 performance evidence and 13 knowledge evidence requirements. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.

Elements & performance criteria

1 Determine job requirements

1.1Follow standard operating procedures (SOPs)
1.2Comply with work health and safety (WHS) requirements at all times
1.3Use appropriate personal protective equipment (PPE) in accordance with SOPs
1.4Identify job requirements from specifications, job sheets or work instructions

2 Assess wheel condition

2.1Apply rim/tyre designs, constructions, codes, balancing, fastening principles and terminology when assessing wheel condition
2.2Assess fastening components for damage and security
2.3Recognise abnormal tyre wear and determine cause of fault
2.4Recognise unsafe tyre and/or wheel condition and determine remedial action

3 Rectify and maintain wheel

3.1Adhere to safety procedures associated with tyre/wheel removal, handling, inflation, assembly and disassembly and fastening
3.2Remove wheels/tyres and replace using appropriate tools, equipment and techniques
3.3Apply tools and equipment in accordance with SOPs
3.4Perform ballasting and/or inflation of tyres to specification
3.5Perform static/dynamic balancing of wheels to specification
3.6Rectify rim/tyre/tube faults to specifications, regulations or codes
3.7Lubricate wheel bearings to specification
3.8Record all service/rectification activities

Performance evidence

following work instructions, standard operating procedures (SOPs) and safe work practices
identifying and interpreting specifications, charts, lists and other applicable reference documents to maintain wheels and tyres
checking wheels and tyres for compliance to specifications
inspecting wheel fastening components for damage and security and tyres for abnormal wear
identifying corrective action to be taken for unsafe tyre and wheel condition
removing and replacing wheels/tyres using appropriate tools, equipment and techniques
undertaking ballasting and/or inflation of tyres and balancing wheels to specifications
identifying and repairing rim, tyres and tube faults to specifications
lubricating wheel bearings in accordance with specifications
recording/reporting all service/work activities in accordance with SOPs

Knowledge evidence

safe work practices and procedures and use of personal protective equipment (PPE)
design and construction of a variety of rims and tyres
principles of fastening and balancing of wheels
relevant codes and standards
procedures for:
checking wheels for damage and secure fastening and reasons that apply
removing, handling, inflating, assembling/disassembling and fastening of tyres and wheels and tools, techniques and equipment to be used
static and dynamic balancing of wheels and reasons for selecting the chosen tools, techniques and equipment
repairing rim, tyre and tube faults and tools, techniques and equipment to be used
recording repairs undertaken on rims, tyres and tubes
lubricating wheel bearings and the type of lubricant and their application that applies
causes of abnormal tyre wear and examples and causes of unsafe tyre and wheel condition
examples of unrepairable rim, tyre and tube faults

Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.

See what you get before you start

Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:

Questions about assessing MEM27029

What does an assessment tool for MEM27029 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for MEM27029 needs to address all 39 unit components: 3 elements with 16 performance criteria, 10 performance evidence requirements, 13 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for MEM27029?

Auditori pulls the current release of MEM27029 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for MEM27029 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing MEM27029 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of MEM27029, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.

Related units

Your MEM27029 assessment tool, in minutes.

First unit free. No card, no RTO registration, no subscription.

Generate MEM27029 free