MEM27012 — Maintain mobile plant suspension systems

Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.

Generate MEM27012 free See a real sample

Every new account includes a free credit — no card, no subscription.

What an assessment for MEM27012 must cover

35 assessable components: 3 elements (15 performance criteria), 10 performance evidence and 10 knowledge evidence requirements. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.

Elements & performance criteria

1 Determine job requirements

1.1Follow standard operating procedures (SOPs)
1.2Comply with work health and safety (WHS) requirements at all times
1.3Use appropriate personal protective equipment (PPE) in accordance with SOPs
1.4Identify job requirements from specifications, drawings, job sheets or work instructions

2 Assess suspension systems

2.1Apply principles of operation and terminology to alignment and suspension systems
2.2Assess components for security, wear and faults and determine corrective action
2.3Assess component parts and determine the need for repair or replacement
2.4Test suspension arrangements, control arms/links, dampening and control devices for correct operation
2.5Assess axle alignment/tracking and determine variance from specification
2.6Test auto/manual levelling devices for performance to specifications

3 Maintain suspension systems

3.1Align axles to specification
3.2Adjust ride height to specification
3.3Re-gas suspension system to specification
3.4Remove/replace suspension components using appropriate tools, equipment and techniques
3.5Record all service and rectification activities

Performance evidence

following work instructions, standard operating procedures (SOPs) and safe work practices
identifying and interpreting specifications, charts, lists, drawings and other applicable reference documents to maintain suspension systems
inspecting the suspension components for wear, faults and security
testing suspension arrangements, control arms/links and dampening devices for correct operation
checking axle alignment/tracking for compliance with specifications and identifying variations of axle alignment from specification
undertaking calculations and numerical operations associated with maintaining suspension systems
testing automatic/manual levelling devices for correct operation
aligning axles, adjusting the ride height and re-gassing the suspension system to specifications
removing/replacing suspension components using appropriate tools, equipment and techniques
recording/reporting all service and rectification work activities in accordance with SOPs

Knowledge evidence

safe work practices and procedures and use of personal protective equipment (PPE)
operation of suspension systems and the effects of steering geometry and alignment
procedures for checking suspension system components for wear, faults, security and conformance to specification and tools, techniques and equipment
procedures for aligning axles and specifications that apply
procedures for adjusting ride height and specifications that apply
procedures for re-gassing suspension systems and precautions to be taken
procedures for removing and replacing suspension systems and precautions to be taken
parameter determining suitability of repair or replacement of components and component parts
action to be taken to correct non-conformance to specification
tools, techniques and equipment required to maintain and repair suspension systems and reasons for selection

Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.

See what you get before you start

Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:

Questions about assessing MEM27012

What does an assessment tool for MEM27012 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for MEM27012 needs to address all 35 unit components: 3 elements with 15 performance criteria, 10 performance evidence requirements, 10 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for MEM27012?

Auditori pulls the current release of MEM27012 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for MEM27012 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing MEM27012 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of MEM27012, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.

Related units

Your MEM27012 assessment tool, in minutes.

First unit free. No card, no RTO registration, no subscription.

Generate MEM27012 free