MEM26013 — Select and use composite processes or systems appropriate for product

Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.

Generate MEM26013 free See a real sample

Every new account includes a free credit — no card, no subscription.

What an assessment for MEM26013 must cover

41 assessable components: 3 elements (21 performance criteria), 7 performance evidence and 13 knowledge evidence requirements. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.

Elements & performance criteria

1 Determine process requirements of the product

1.1Follow standard operating procedures (SOPs)
1.2Comply with work health and safety (WHS) requirements at all times
1.3Select and use appropriate personal protective equipment (PPE) in accordance with SOPs
1.4Determine physical, chemical and aesthetic characteristics of the product
1.5Determine production volume and delivery schedule
1.6Determine regulatory requirements

2 Select most appropriate process/ system

2.1Identify processes which can deliver requirements of product
2.2Determine the capability of the organisation to use the processes and meet the requirements
2.3Evaluate each process against the requirements
2.4Select most appropriate process
2.5Fabricate a sample using most appropriate process
2.6Conduct/organise for relevant tests
2.7Evaluate test results
2.8Review test results against product and sustainability requirements
2.9Review selected fabrication process and make any required changes to process

3 Use process to make product

3.1Identify and control hazards
3.2Fabricate product using selected process and minimise waste
3.3Review product compared to requirements
3.4Review fabrication process
3.5Identify areas for improvement and take corrective actions
3.6Complete any required documentation/reporting according to SOPs

Performance evidence

following work instructions, standard operating procedures (SOPs) and safe work practices
identifying and interpreting specifications, formulas/recipes, batch sheets for selecting and using composite processes or systems appropriate for product
considering all reasonably available processes in selecting and choosing the appropriate processes or systems, including technical, practical, cost and sustainability criteria
fabricating a sample and conducting/organising relevant test and evaluating the test results and making any required changes, as appropriate
fabricating the final product using selected process and minimising waste in accordance with specifications
identifying areas for improvement and taking appropriate action
completing all documentation and reports, including items requiring further action, in accordance with SOPs.

Knowledge evidence

safe work practices and procedures and use of personal protective equipment (PPE)
current state/territory work health and safety (WHS) legislation, standards and codes of practice relevant to using composite processes or systems appropriate for product
cost analysis for each process to select best process
technical standards/suitability
mechanical stresses
life cycle assessment for each process
ease of manufacture
testing criteria
failure modes effects analysis (FMEA)
typical applications of each major type of process, strengths and weaknesses
grid analysis
hazards and the hierarchy of hazard control measures
product characteristics design requirements.

Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.

See what you get before you start

Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:

Questions about assessing MEM26013

What does an assessment tool for MEM26013 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for MEM26013 needs to address all 41 unit components: 3 elements with 21 performance criteria, 7 performance evidence requirements, 13 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for MEM26013?

Auditori pulls the current release of MEM26013 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for MEM26013 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing MEM26013 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of MEM26013, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.

Related units

Your MEM26013 assessment tool, in minutes.

First unit free. No card, no RTO registration, no subscription.

Generate MEM26013 free