MEM26010 — Store and handle composite materials

Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.

Generate MEM26010 free See a real sample

Every new account includes a free credit — no card, no subscription.

What an assessment for MEM26010 must cover

38 assessable components: 4 elements (23 performance criteria), 6 performance evidence and 9 knowledge evidence requirements. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.

Elements & performance criteria

1 Identify properties and characteristics of materials used

1.1Follow standard operating procedures (SOPs)
1.2Comply with work health and safety (WHS) requirements at all times
1.3Select and use appropriate personal protective equipment (PPE) in accordance with SOPs
1.4List all materials used on site
1.5Interpret safety data sheet (SDS) for each material
1.6Identify relevant manual handling issues
1.7Identify and define environmental hazards for each material
1.8Categorise materials into groups based on their hazards and determine appropriate hazard controls

2 Identify key factors effecting storage and handling

2.1Identify requirements for dangerous goods licence
2.2Identify environmental regulation requirements
2.3Identify usage patterns and frequencies
2.4Identify cost sensitivity to volume purchased
2.5Identify shelf life

3 Determine appropriate storage and handling protocols

3.1Check manufacturer’s storage and handling recommendations/requirements
3.2Check SDS and dangerous goods/Environment Protection Agency (EPA)/WHS requirements
3.3Check company usage requirements
3.4Resolve conflicts between different requirements
3.5Prepare storage and handling procedure for materials

4 Store and handle materials in accordance with protocols

4.1Identify and control hazards
4.2Use required handling aids
4.3Move and store materials in accordance with procedures
4.4Monitor storage and handling of materials and identify areas for improvement and take appropriate action, as required
4.5Complete any required documentation/reporting according to SOPs

Performance evidence

following work instructions, standard operating procedures (SOPs) and safe work practices
identifying and interpreting safety data sheets (SDS), formulas/recipes, batch sheets for storing and handling composite materials
listing all materials on site
identifying all hazards and implementing appropriate hazard control measures based on the hierarchy of control
moving materials using appropriate manual handling techniques and mechanical handling devices to appropriate storage site in accordance with procedures
completing all documentation and reports, including items requiring further action, in accordance with SOPs

Knowledge evidence

safe work practices and procedures and use of personal protective equipment (PPE)
SDS and product data sheets
current state/territory work health and safety (WHS) legislation, standards and codes of practice relevant to the handling and storage of composite materials
the hierarchy of hazard control measures
material registers (e.g. set up hazardous goods register, maintain it and use it)
bunding and ventilation
handling and storage and impact on product
contamination (e.g. from water)
storage temperature (e.g. low temperature for catalyst)

Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.

See what you get before you start

Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:

Questions about assessing MEM26010

What does an assessment tool for MEM26010 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for MEM26010 needs to address all 38 unit components: 4 elements with 23 performance criteria, 6 performance evidence requirements, 9 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for MEM26010?

Auditori pulls the current release of MEM26010 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for MEM26010 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing MEM26010 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of MEM26010, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.

Related units

Your MEM26010 assessment tool, in minutes.

First unit free. No card, no RTO registration, no subscription.

Generate MEM26010 free