Auditori
Get started

MEM25007 — Maintain marine vessel surfaces

Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.

Generate MEM25007 freeSee a real sample

Every new account includes a free credit — no card, no subscription.

What an assessment for MEM25007 must cover

36 assessable components: 3 elements (18 performance criteria), 7 performance evidence and 11 knowledge evidence requirements. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.

Elements & performance criteria

1 Determine job requirements

  • 1.1Follow standard operating procedures (SOPs)
  • 1.2Comply with work health and safety (WHS) requirements at all times
  • 1.3Use appropriate personal protective equipment (PPE) in accordance with SOPs
  • 1.4Identify job requirements from specifications, job sheets or work instructions
  • 1.5Identify sectors, surfaces and fittings requiring inspection
  • 1.6Establish condition of sectors/surfaces and fittings
  • 1.7Establish appropriate cosmetic maintenance/repair requirements and methods
  • 1.8Identify and take action to minimise risks associated with toxic materials

2 Clean and prepare vessel sectors and surfaces

  • 2.1Select and use correct cleaning tools, equipment and materials
  • 2.2Clean fittings and prepare for maintenance
  • 2.3Ensure surfaces and sectors are cleaned and free of contaminants

3 Perform cosmetic maintenance/repair and finish surfaces

  • 3.1Prepare surfaces, fill and fair ready for finishing
  • 3.2Confirm compatibility of re-coating material
  • 3.3Select and apply material coatings
  • 3.4Maintain/replace fittings, as appropriate
  • 3.5Clean tools and equipment and store according to SOPs
  • 3.6Re-coat surfaces, where applicable
  • 3.7Sand surfaces and buff/polish to specification, where applicable

Performance evidence

  • following work instructions, standard operating procedures (SOPs) and safe work practices
  • identifying and interpreting specifications to establish appropriate cosmetic maintenance/repair requirements, including cosmetic environmental and other damage
  • identifying surface coating of different sectors of the marine vessel surfaces and detecting faults, flaws and breakdown in surface integrity
  • identifying and taking actions to minimise risks associated with toxic materials
  • selecting and using appropriate cleaning tools, equipment and materials to clean/etch surfaces
  • removing fittings and preparing parts/sections in need of repair and carrying out repairs using and applying fillers, caulking compounds, sealants, adhesives and gel coats, where required
  • preparing surfaces in readiness for application of surface finishing and protective coatings and applying/restoring in accordance with procedures and reinstalling/replacing fittings.

Knowledge evidence

  • safe work practices and procedures and use of personal protective equipment (PPE)
  • structure, component, and surface type identification
  • written and verbal instruction and specification
  • range of cleaning/etching/cutting solutions and compounds
  • protective and preservative coatings
  • fault and blemish identification
  • types of fillers, caulking, sealants, adhesives and their uses
  • operation of hand and mechanical tools including high- pressure cleaning devices
  • methods of cleaning, performing cosmetic repair and surface preparation, finishing and preservation
  • environmental impact of run-off and waste
  • waste disposal obligations and regulations.

Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.

See what you get before you start

Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:

Questions about assessing MEM25007

What does an assessment tool for MEM25007 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for MEM25007 needs to address all 36 unit components: 3 elements with 18 performance criteria, 7 performance evidence requirements, 11 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for MEM25007?

Auditori pulls the current release of MEM25007 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for MEM25007 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing MEM25007 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of MEM25007, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.

Related units

Your MEM25007 assessment tool, in minutes.

First unit free. No card, no RTO registration, no subscription.

Generate MEM25007 free