MEM25006 — Undertake marine sheathing operations

Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.

Generate MEM25006 free See a real sample

Every new account includes a free credit — no card, no subscription.

What an assessment for MEM25006 must cover

45 assessable components: 4 elements (22 performance criteria), 8 performance evidence and 15 knowledge evidence requirements. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.

Elements & performance criteria

1 Determine job requirements

1.1Follow standard operating procedures (SOPs)
1.2Comply with work health and safety (WHS) requirements at all times
1.3Use appropriate personal protective equipment (PPE) in accordance with SOPs
1.4Identify job requirements from specifications, job sheets or work instructions

2 Prepare surface areas and apply materials

2.1Prepare application material in accordance with manufacturer specifications
2.2Prepare surface area to suit job application
2.3Remove surface contaminants using appropriate method
2.4Protect non-contact surface areas, where applicable
2.5Apply measures to prevent external contamination in accordance with organisational procedures
2.6Use appropriate equipment to calibrate mixing quantities
2.7Select hand tools for mixing and application to suit job requirements

3 Prepare and apply application materials

3.1Prepare/mix materials in accordance with manufacturer specifications
3.2Calculate material quantities and cut to produce minimum wastage
3.3Select and use application tools
3.4Carry out application procedures in accordance with manufacturer specifications
3.5Hold job materials securely in place until curing process is achieved, where applicable
3.6Remove excess material
3.7Clean up application tools and store
3.8Clean up job area to maximise safe working conditions

4 Seal fabricated components

4.1Complete surface preparation in accordance with manufacturer specifications
4.2Apply sealant to components and secure in accordance with specifications and/or drawings
4.3Clean off excess sealant and test/check to ensure water tightness

Performance evidence

following work instructions, standard operating procedures (SOPs) and safe work practices
identifying and clarifying sheathing application, material and other relevant specifications for undertaking marine sheathing operations
preparing surface materials and measuring sheathing lengths to produce minimal wastage to suit job application
preparing surface area, including removal of contaminants and shielding surface areas not being sheathed
selecting hand and power tools to mix solutions in correct ratios and applying in accordance with manufacturer specifications
securing matting/cloth and waste overhang and holding job materials securely in place until curing process is achieved
removing excess materials to produce minimum sanding/finishing requirements and disposing of waste in accordance with legislative requirements
applying sealant to components and testing/checking to ensure water tightness

Knowledge evidence

safe work practices and procedures and use of personal protective equipment (PPE)
sheathing material specifications, properties and uses
surface types, specifications, cleaning and preparation techniques
site and sheathing preparation
sealant types, specifications, application and finishing techniques
masking procedures
bonding/impregnating/reinforcing material specifications, properties and uses
use of tools for sizing, measuring, mixing, applying sheathing and bonding/impregnating/reinforcing mixtures and finishing
sheathing applications
waste minimisation techniques and waste disposal obligations and regulations
methods for securing materials and waste overhang
techniques/procedures for removal of excess resin
methods for cleaning and storage of tools
sanding/re-coating procedures
water testing techniques

Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.

See what you get before you start

Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:

Questions about assessing MEM25006

What does an assessment tool for MEM25006 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for MEM25006 needs to address all 45 unit components: 4 elements with 22 performance criteria, 8 performance evidence requirements, 15 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for MEM25006?

Auditori pulls the current release of MEM25006 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for MEM25006 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing MEM25006 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of MEM25006, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.

Related units

Your MEM25006 assessment tool, in minutes.

First unit free. No card, no RTO registration, no subscription.

Generate MEM25006 free