MEM19034 — Apply chain manufacture process

Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.

Generate MEM19034 free See a real sample

Every new account includes a free credit — no card, no subscription.

What an assessment for MEM19034 must cover

38 assessable components: 4 elements (16 performance criteria), 7 performance evidence and 15 knowledge evidence requirements. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.

Elements & performance criteria

1 Determine job requirements

1.1Follow standard operating procedures (SOPs)
1.2Comply with work health and safety (WHS) requirements at all times
1.3Use personal protective equipment (PPE) in accordance with SOPs
1.4Identify job requirements from specifications

2 Draw wire for chain

2.1Establish and organise stages, materials, tools and equipment for making to size required the fabrication process
2.2Calculate and cut materials and draw wire to the required size
2.3Complete required annealing of materials to relieve stress and work hardening
2.4Draw materials to specified tolerance using appropriate equipment
2.5Obtain and prepare resources and equipment for fabrication work

3 Fabricate jewellery chains

3.1Produce spit jig suitable for specified chain
3.2Produce links to the correct size and specification
3.3Solder links free from pit holes and flooding
3.4Construct chain links sequentially
3.5Conduct quality assurance during construction to maintain link consistency and meet specifications

4 Finish jewellery chains

4.1Polish and finish chains to a blemish-free high lustre
4.2Clean up and maintain production environment, including polishing machines and tumblers, in accordance with SOPs

Performance evidence

following work instructions, standard operating procedures (SOPs) and safe work practices
applying chain manufacturing process on at least two occasions in accordance with SOPs, including the use of tools and equipment
calculating and cutting materials and rolling materials to size and thickness
annealing to relieve stress and work hardening according to job requirements
drawing materials to size required
producing jewellery chains from wire on at least two occasions using soldering materials and equipment
finishing jewellery chains to a blemish-free high lustre

Knowledge evidence

safe work practices and procedures and use of personal protective equipment (PPE)
equipment and techniques used in chain manufacture
uses of wire and chain
use of rolling equipment and techniques for rolling
calculations and measurements
procedures to anneal material and reasons for stress relieving metal
equipment and techniques and safety requirements for wire drawing
use of cleaning solution and safe practices with chemicals
procedure to make a split jig
techniques for coiling and cutting link wire
procedures to fit and solder chain links
safe use of polishing lathe and polishing tumbler
selection and use of buffs and compounds
selection, use and maintenance of steel polishing shot
environmental considerations related to chain manufacture.

Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.

See what you get before you start

Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:

Questions about assessing MEM19034

What does an assessment tool for MEM19034 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for MEM19034 needs to address all 38 unit components: 4 elements with 16 performance criteria, 7 performance evidence requirements, 15 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for MEM19034?

Auditori pulls the current release of MEM19034 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for MEM19034 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing MEM19034 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of MEM19034, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.

Related units

Your MEM19034 assessment tool, in minutes.

First unit free. No card, no RTO registration, no subscription.

Generate MEM19034 free