MEM18112 — Perform basic eddy current testing

Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.

Generate MEM18112 free See a real sample

Every new account includes a free credit — no card, no subscription.

What an assessment for MEM18112 must cover

35 assessable components: 4 elements (13 performance criteria), 6 performance evidence and 16 knowledge evidence requirements. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.

Elements & performance criteria

1 Determine job requirements

1.1Follow standard operating procedures (SOPs)
1.2Comply with work health and safety (WHS) requirements at all times
1.3Use appropriate personal protective equipment (PPE) in accordance with SOPs
1.4Identify job requirements from specifications

2 Prepare inspection areas for basic eddy current testing

2.1Clean inspection areas and prepare for testing using appropriate procedures and materials
2.2Carry out preparation processes in accordance with the relevant procedures
2.3Assess inspection areas visually and identify obvious discontinuities

3 Perform basic tests

3.1Identify nominated test from SOPs
3.2Prepare test equipment in accordance with standards and/or procedures
3.3Carry out eddy current test procedure in accordance with relevant work instructions
3.4Maintain eddy current test equipment and store in accordance with SOPs

4 Report the results of basic eddy current tests

4.1Check and confirm basic indications and identify defects in accordance with organisational standards and/or procedures
4.2Report test results in accordance with organisational standards and/or procedures

Performance evidence

following work instructions, standard operating procedures (SOPs) and safe work practices
identifying and interpreting specifications, standards and other reference documentation for performing basic eddy current testing
preparing the area for testing and identifying discontinuities and defects in accordance with procedures
carrying out eddy current testing using techniques and equipment appropriate for material/s to be tested, checking and confirming basic indicators and identifying all defects in accordance with procedures on at least two occasions
undertaking numerical operations and calculations associated with performing eddy current testing
reporting test results in accordance with procedures and customer service requirements on at least two occasions

Knowledge evidence

safe work practices and procedures and use of personal protective equipment (PPE)
cleaning and preparation processes, procedures and work health and safety (WHS) requirements in relation to the preparation process
visual inspection relevant to eddy current testing
eddy current instrument set-up and probe selection
types of discontinuities and their consequences
procedure for carrying out basic eddy current testing and the necessary system verification checks
testing and compliance standards (organisation specific)
basic principles of electricity, magnetism, electromagnetism and eddy current testing
basic electrical principles
overview of factors affecting eddy current response
limitations of eddy current testing
basic maintenance and storage procedures for testing equipment
standard defects and comparative techniques
industry-specific and workplace relevant common basic defects
standard recording and reporting formats and methods and/or procedures for reporting test results
standard procedures for the following eddy current test applications: o weld inspection o wheel bead seat o production line o tube production line o conductivity measurement methods

Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.

See what you get before you start

Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:

Questions about assessing MEM18112

What does an assessment tool for MEM18112 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for MEM18112 needs to address all 35 unit components: 4 elements with 13 performance criteria, 6 performance evidence requirements, 16 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for MEM18112?

Auditori pulls the current release of MEM18112 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for MEM18112 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing MEM18112 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of MEM18112, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.

Related units

Your MEM18112 assessment tool, in minutes.

First unit free. No card, no RTO registration, no subscription.

Generate MEM18112 free