MEM18098 — Prepare to perform work associated with fuel system installation and servicing

Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.

Generate MEM18098 free See a real sample

Every new account includes a free credit — no card, no subscription.

What an assessment for MEM18098 must cover

37 assessable components: 4 elements (17 performance criteria), 8 performance evidence and 12 knowledge evidence requirements. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.

Elements & performance criteria

1 Determine job requirements

1.1Follow standard operating procedures (SOPs)
1.2Comply with work health and safety (WHS) requirements at all times
1.3Use appropriate personal protective equipment (PPE) in accordance with SOPs
1.4Identify job requirements from specifications, drawings, job sheets or work instructions

2 Plan and prepare for installation or servicing task

2.1Clarify job requirements and variations to work plan and take appropriate action
2.2Obtain required work permits
2.3Identify and comply with emergency and safety procedures for worksite

3 Confirm location and nature of key fuel system components

3.1Identify and locate above and below ground storage components
3.2Identify and locate fuel conveying, pumps and dispensing systems
3.3Confirm location of fuel system components with site plan
3.4Identify and report any hazards and/or inconsistencies with site plan, equipment drawings and regulatory requirements

4 Assess and manage risks associated with the work

4.1Identify fuels and other hazardous materials and other hazards on site
4.2Identify and confirm shut-off procedures, details of evacuation plan and location of emergency equipment
4.3Assess hazards and determine risks and apply appropriate control measures to control risks
4.4Select appropriate tools and equipment to be used on the job
4.5Identify nature and location of required isolations
4.6Determine the type of, and appropriate locations for, barriers to prevent unauthorised access to the work location and put them in place before job commencement

Performance evidence

following work instructions, standard operating procedures (SOPs) and safe work practices
obtaining relevant work permits and other work documents required for the job
identifying and complying with emergency and safety procedures relevant to the site
identifying types of fuel and their associated hazards
identifying fuel delivery systems and their associated hazards, including pressure, suction, flammability, explosive potential, toxicity and static electricity
determining appropriate control measures using hierarchy of control and identifying support and assistance requirements and establishing plan for the performance of work
applying any state/territory licensing, work health and safety (WHS) and environmental legislation, standards and industry codes of practice
relating to people from a range of social, cultural and ethnic backgrounds and of varying physical and mental abilities

Knowledge evidence

safe work practices and procedures and use of personal protective equipment (PPE)
types of fuels and their associated hazards
fuel delivery systems and associated hazards, including pressure, suction, flammability, explosive potential, toxicity and static electricity
dangerous goods classification and labelling
storage and handling of dangerous goods
suction/pressure systems
first stage vapour recovery systems
second stage vapour recovery systems
pumps and pumping principles and problems
fuel dispensing and metering systems
interpretation of permits, site maps and hazard maps
regulatory requirements, including licensing, WHS and environmental regulations

Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.

See what you get before you start

Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:

Questions about assessing MEM18098

What does an assessment tool for MEM18098 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for MEM18098 needs to address all 37 unit components: 4 elements with 17 performance criteria, 8 performance evidence requirements, 12 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for MEM18098?

Auditori pulls the current release of MEM18098 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for MEM18098 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing MEM18098 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of MEM18098, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.

Related units

Your MEM18098 assessment tool, in minutes.

First unit free. No card, no RTO registration, no subscription.

Generate MEM18098 free