MEM18065 — Diagnose and repair digital equipment and components

Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.

Generate MEM18065 free See a real sample

Every new account includes a free credit — no card, no subscription.

What an assessment for MEM18065 must cover

44 assessable components: 3 elements (15 performance criteria), 9 performance evidence and 20 knowledge evidence requirements. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.

Elements & performance criteria

1 Determine job requirements

1.1Follow standard operating procedures (SOPs)
1.2Comply with work health and safety (WHS) requirements at all times
1.3Use appropriate personal protective equipment (PPE) in accordance with SOPs
1.4Identify job requirements from specifications, drawings, job sheets or work instructions

2 Locate fault

2.1Determine system/equipment functions and principles by reference to equipment manuals and circuit diagrams
2.2Run built-in test functions and check and review fault indicators error codes and appropriate maintenance records
2.3Reproduce fault symptoms and verify using fault-finding techniques
2.4Isolate faulty equipment and remove from system using appropriate tools and techniques
2.5Check and test equipment using appropriate test equipment and fault finding techniques
2.6Identify faulty component and/or isolate fault cause

3 Repair/replace faulty components

3.1Remove faulty component using appropriate tools and techniques
3.2Repair/replace faulty component in accordance with site/manufacturers’ recommended procedures
3.3Refit repaired/replacement components
3.4Refit repaired equipment to system
3.5Check and test systems/equipment for compliance with specifications using appropriate test procedures and equipment

Performance evidence

following work instructions, standard operating procedures (SOPs) and safe work practices
identifying and interpreting equipment specifications, manuals, circuit and schematic diagrams, maintenance records and supplier catalogues and obtaining relevant data with respect to diagnosing and repairing digital equipment and components
checking electronic equipment/sub-assemblies, components, connections and terminations for compliance to specifications
locating, reading/recording and diagnosing built-in fault indicators and obtaining error code interpretation documents and running test functions and recording faults and/or equipment status indicated by built-in test functions/displays
checking and testing equipment using appropriate test equipment and fault-finding techniques for compliance to specifications
reproducing fault symptoms in the electronic equipment and verifying faults using appropriate test equipment and fault-finding techniques to locate and isolate faulty component or fault cause
removing and replacing faulty components from the electronic equipment
adjusting/tuning, calibrating and testing the repaired electronic equipment/sub-assemblies to specifications
returning the repaired equipment and components to service in accordance with SOPs.

Knowledge evidence

safe work practices and procedures and use of personal protective equipment (PPE)
implications of electro-static discharge (ESD) upon the electronic equipment
analog and digital electronics, including amplifiers, oscillators, power suppliers, filters, transistors, ICs, digital timers, gate arrays, transmitters and converters
function(s) of the electronic equipment/sub-assembly
procedures for: running built-in test functions
procedures for: verifying faults in electronic equipment/sub-assemblies
procedures for: isolating electronic equipment/sub-assemblies
procedures for: removing sub-assemblies from electronic equipment
procedures for: testing faulty sub-assemblies
procedures for: removing and repairing/replacing faulty components from electronic equipment
procedures for: fitting repaired/replaced components into sub-assemblies and sub-assemblies into electronic equipment
procedures for: testing electronic equipment/sub-assembly performance
errors indicated by built-in devices
symptoms of the fault in the electronic equipment/sub-assembly and purpose of reproducing fault symptoms
test equipment and techniques necessary to confirm electronic equipment/sub-assembly faults
tools and techniques to be used to remove/refit/repair/replace the faulty sub-assemblies/component from the electronic equipment
operational specifications of the sub-assembly
equipment and techniques to be used to test the faulty sub-assemblies/component and probable causes of component failure
operational specifications of the electronic equipment/sub-assembly/component
test equipment and techniques necessary to check electronic equipment/sub-assembly performance.

Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.

See what you get before you start

Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:

Questions about assessing MEM18065

What does an assessment tool for MEM18065 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for MEM18065 needs to address all 44 unit components: 3 elements with 15 performance criteria, 9 performance evidence requirements, 20 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for MEM18065?

Auditori pulls the current release of MEM18065 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for MEM18065 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing MEM18065 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of MEM18065, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.

Related units

Your MEM18065 assessment tool, in minutes.

First unit free. No card, no RTO registration, no subscription.

Generate MEM18065 free