MEM18018 — Maintain pneumatic system components
Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.
Every new account includes a free credit — no card, no subscription.
What an assessment for MEM18018 must cover
32 assessable components: 3 elements (14 performance criteria), 8 performance evidence and 10 knowledge evidence requirements. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.
Elements & performance criteria
1 Determine job requirements
- 1.1Follow standard operating procedures (SOPs)
- 1.2Comply with work health and safety (WHS) requirements at all times
- 1.3Use appropriate personal protective equipment (PPE) in accordance with SOPs
- 1.4Identify job requirements from specifications, drawings, job sheets or work instructions
2 Check pneumatic system components
- 2.1Identify the characteristics and operational function of each system component
- 2.2Inspect and test the operational function of each component
- 2.3Assess correct operation of each component against specifications
3 Identify, repair or replace faulty pneumatic system components
- 3.1Localise faulty system components and confirm malfunction by inspection and testing using fluid power principles, procedures and safety requirements
- 3.2Dismantle faulty system components and repair to manufacturers’/site specifications
- 3.3Select replacement parts from appropriate sources
- 3.4Reassemble system components and verify for correct operation and test against specifications
- 3.5Confirm correct operation of the pneumatic system according to SOPs
- 3.6Adopt appropriate follow-up procedures
- 3.7Complete service reports
Performance evidence
- following work instructions, standard operating procedures (SOPs) and safe work practices
- identifying and interpreting specifications, charts, lists, drawings and other applicable reference documents to maintain pneumatic system components
- inspecting and testing pneumatic system components to predetermined specifications using fluid power principles
- checking component parts visually and dimensionally for compliance to specification and, where appropriate, marking faulty parts for repair, replacement or adjustment
- dismantling and repairing faulty system components, including selecting replacement parts from manufacturers’/suppliers’ catalogues to site or manufacturers’ specifications
- assembling and testing pneumatic components for correct operation and compliance to specifications
- checking the operation of the pneumatic system for compliance to specifications
- completing service reports in accordance with SOPs
Knowledge evidence
- safe work practices and procedures and use of personal protective equipment (PPE)
- full range of pneumatic system components and characteristics/operational function of each component
- procedures and equipment for inspecting and testing pneumatic system components
- specifications of each pneumatic system component
- faulty system components and causes of faulty components
- individual components within the pneumatic system
- procedures for repairing pneumatic system components
- procedures for checking pneumatic system operation
- follow-up procedures with respect to repaired/replaced pneumatic system components
- reporting/recording procedures
Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.
See what you get before you start
Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:
Questions about assessing MEM18018
What does an assessment tool for MEM18018 need to cover?
To satisfy the Principles of Assessment and Rules of Evidence, an assessment for MEM18018 needs to address all 32 unit components: 3 elements with 14 performance criteria, 8 performance evidence requirements, 10 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.
How does Auditori generate an assessment tool for MEM18018?
Auditori pulls the current release of MEM18018 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.
Is the first assessment tool really free?
Yes. Every new account includes one free credit — enough to generate the complete assessment tool for MEM18018 — with no card and no subscription required. After that it's pay-as-you-go per unit.
Can I check my existing MEM18018 assessment instead of generating a new one?
Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of MEM18018, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.
Related units
- MEM03001 — Perform manual production assembly
- MEM03002 — Perform precision assembly
- MEM03003 — Perform sheet and plate assembly
- MEM03004 — Perform electronic/electrical assembly (production)
- MEM03005 — Rework and repair (electrical/electronic production)
- MEM03006 — Set assembly stations
- MEM04001 — Operate melting furnaces
- MEM04002 — Perform gravity die casting
- MEM04003 — Operate pressure die casting machine
- MEM04004 — Prepare and mix sand for metal moulding
- MEM04006 — Operate sand moulding and core making machines
- MEM04007 — Pour molten metal
Your MEM18018 assessment tool, in minutes.
First unit free. No card, no RTO registration, no subscription.
Generate MEM18018 free