Auditori
Get started

MEM15007 — Conduct product and/or process capability studies

Generate a complete, audit-ready assessment tool for this unit in minutes: candidate assessment, assessor guide with model answers, and a coverage matrix mapped to every component below. Reviewed and approved by your qualified person, exported under your branding.

Generate MEM15007 freeSee a real sample

Every new account includes a free credit — no card, no subscription.

What an assessment for MEM15007 must cover

41 assessable components: 4 elements (16 performance criteria), 8 performance evidence and 17 knowledge evidence requirements. An audit-defensible tool maps every question and task back to these — that mapping is the coverage matrix Auditori generates alongside the assessment.

Elements & performance criteria

1 Determine job requirements

  • 1.1Follow standard operating procedures (SOPs)
  • 1.2Comply with work health and safety (WHS) requirements at all times
  • 1.3Use appropriate personal protective equipment (PPE) in accordance with SOPs
  • 1.4Consult with production or process personnel within the enterprise’s total quality plan about conducting studies

2 Conduct process capability studies

  • 2.1Determine procedure for conducting capability study
  • 2.2Prepare instructions for personnel conducting trial run
  • 2.3Analyse data from trial run and calculate the process capability
  • 2.4Estimate possible number of product defects from a particular process
  • 2.5Determine optimum target mean to suit process capability data
  • 2.6Prepare reports listing various options from process capability studies
  • 2.7Recommend design specifications based on an analysis of data

3 Set control limits

  • 3.1Calculate control limits for sample/subgroup average, range and standard deviation
  • 3.2Calculate warning limits for subgroup average, range and standard deviation
  • 3.3Determine course of action resulting from out-of-control situation and document according to SOPs

4 Select sampling plans

  • 4.1Select appropriate sampling plan to suit production schedule and determine acceptable quality limits, taking into account specified producer and consumer risks
  • 4.2Document sampling plan, including implementation strategy

Performance evidence

  • following work instructions, standard operating procedures (SOPs) and safe work practices
  • determining procedure for conducting capability study
  • analysing data, identifying solutions and developing recommendations
  • estimating the possible number of defects compared to the specification requirements
  • preparing reports listing the various options
  • determining process design specifications from process capability data
  • selecting appropriate sampling plan
  • documenting sampling plan and implementation strategy in accordance with SOPs.

Knowledge evidence

  • safe work practices and procedures and use of personal protective equipment (PPE)
  • process to be studied
  • procedures for conducting process capability studies
  • data used to calculate the process capability
  • procedures for estimating the possible number of product defects
  • options for improving the process and benefits of each
  • procedures for determining the optimum target mean
  • numerical operations and calculations/formulae for process capability, control limits and other outcomes within the scope of this unit
  • procedures for setting control and warning limits
  • concept of out-of-control situations
  • action to be taken when an out-of-control situation is detected and procedures for documenting out-of-control situations
  • acceptable level of quality
  • variety of sampling plans and their application
  • sampling plan to be applied to a given situation and reasons for selection
  • acceptable quality limits
  • risks associated with identifying acceptable quality limits for the producer and customer
  • procedures for documenting and implementing sampling plans.

Unit content sourced from training.gov.au — © Commonwealth of Australia, licensed under CC BY 4.0. Auditori is not affiliated with the Department of Employment and Workplace Relations.

See what you get before you start

Real, unedited Auditori output (RIIHAN201E shown), branded for a sample RTO:

Questions about assessing MEM15007

What does an assessment tool for MEM15007 need to cover?

To satisfy the Principles of Assessment and Rules of Evidence, an assessment for MEM15007 needs to address all 41 unit components: 4 elements with 16 performance criteria, 8 performance evidence requirements, 17 knowledge evidence requirements, and the foundation skills. A coverage matrix mapping each question and task to these components is what an auditor looks for.

How does Auditori generate an assessment tool for MEM15007?

Auditori pulls the current release of MEM15007 from training.gov.au and generates a complete package: candidate assessment, assessor guide with model answers and observation criteria, and a coverage matrix mapping every component. A suitably qualified person then reviews and approves the draft in a built-in workflow — consistent with ASQA's guidance on AI use in VET — before export as branded PDF and editable Word.

Is the first assessment tool really free?

Yes. Every new account includes one free credit — enough to generate the complete assessment tool for MEM15007 — with no card and no subscription required. After that it's pay-as-you-go per unit.

Can I check my existing MEM15007 assessment instead of generating a new one?

Yes — upload your existing assessment or learner guide and Auditori maps it against every element, performance criterion, PE and KE of MEM15007, showing exactly what's covered and what's missing. Mapping costs a quarter of a credit.

Related units

Your MEM15007 assessment tool, in minutes.

First unit free. No card, no RTO registration, no subscription.

Generate MEM15007 free